Newby problem with hum

Thanks everyone. We seem to be making progress.

Here's what I did. I went to Radio Shack and bought three cheaters: one for the CDP, one for the TT and one for the phono stage. This had almost no effect. While I was there I also bought some RF chokes that the guy recommended. I put six on the IC between the TT and the phono stage and this seemed to make the biggest difference. The hum from the CDP is completely gone and the hum from the TT is reduced quite a bit but still there when I crank up the volume. Originally I could hear the cartridge picking up a radio station. That's completely gone but at loud listening levels I can still hear a modest hum between tracks.

A couple more questions...

The guy at Radio Shack said that there my be a problem in the ground wiring in my house. Anyone ever heard of this or had problems with it? Is it worth getting my electrician out? Do the RF chokes affect the signal in any detrimental way? What I'm hearing does sound better already, but just thought I'd check before I go buy a bunch more.

Could it also be a shielding problem with the Kimber Hero's? I've heard that they are shielded but maybe not. I have .5 meter lengths so I can't go any shorter here.

If there are any other ideas, I'm welcome to hear them.

Bundee, I don't have a spf guage so I don't really know how loud it is but it's pretty significant with the volume turned to 3 o'clock. Put it this way, it's still a significant hum.

Steve

First thing to do is go to psaudio.com as they have a section on hum on there web page as it's very helpful, and it will walk you through step by step until you have isolated the problem. The chockes are no good for sound. I think it's your LP! but check out there web site as it will give you great info. Happy fixen!

Smccull, you could have a cable tv ground loop problem. This can be solved by getting a pair of matching transformers($5) and put them in series with the cable tv line. Check your cable tv ground and the ground wire across your water meter. Cheater plugs will work also. Try putting in a dedicated 20amp 12 wire line in and put the cheater plug at the outlet. I am not to crazy about putting cheaters after the filter. Get an A.W. Sperry outlet tester (Home Depot $6)and test the outlet and all outlets in your house for polarity. Put your cheater plug in your dedicated outlet and test the outlet again. It should still light up correct, even though the ground is out. Why, because the ground and nuetral wire are on the same bus in the main box. If you are still getting a ground hum, call an electrician an put in an isolated ground in.