I think you need lots of current for the 1 + 1s. I had a pair in the mid to late 1980s and loved them. I also used an Adcom 555 amp but also used a Janis W1 subwoofer - made a huge difference as this freed main amp from a lot of work. With a properly set up sub (I now use RELs and run main speakers full range)and cut off point at around 70-80 HZ, you should be able to use a number of amps. I would stick with SS (yet Im a tube-a-holic) with these particular speakers but would seriously consider a good tube pre-amp and even no pre-amp - go passive - Placette Audio is an excellent choice and I use one with my 300B amp.
The 1 + 1s do not have much bass and what's there does suck up a lot of current. You will have a much broader range of amp choices if you get a good subwoofer and cut off the speakers at 70-80 HZ. I think lots of current is needed more than high voltage. Good luck, these are great speakers for a large room.
The 1 + 1s do not have much bass and what's there does suck up a lot of current. You will have a much broader range of amp choices if you get a good subwoofer and cut off the speakers at 70-80 HZ. I think lots of current is needed more than high voltage. Good luck, these are great speakers for a large room.