2. amps-preamps
  3. 1092464984

Advice.. Integrated vs Seperates - Low Budget..

Here's the dilemna. I've got two different dealers I deal with primarily, I respect them both and they have very different sets of opinion - which is fine :) So I'm looking for a 3rd...4th.. etc sets of opinion.

I do have a Passive Pre-Amplifier. FT Audio's LW1S2 infact, and have been using it with my NAD C350 (now looking to sell it and move to a real poweramp).

However with my limited budget locally my choice for a poweramp is basically either the Rega Maia, or the Monarchy Audio SM-70. Both of which are hovering in the $800 CDN ($600ish USD) range.

So my one dealer is suggesting that I go for the Monarchy/Passive Pre-amp which does sound very good. The other one is suggesting that I give up on the whole idea of seperates and go to an integrated in the $1500 CDN range, which would be around $1150 USD.

I know that Integrateds have been getting better and better and that in the mid - high end it appears that there are integrateds that can match some seperates (Sim I-5, Plinus 9200, Vecteur etc). But for this price range - where I'm at wouldn't this very nice Passive Pre and match it with a good Power Amp best any similarily priced integrated?

As well can someone please correct me as to the benefits of seperates vs integrated? I had thought it had a lot to do with flexibility (ability to mix n match tube pre with ss amp for example) reduced crosstalk/rfi etc.

Thanks in advance,

Nathan Klassen
vaystrem
cdc2
122 posts
 
You might want to replace your NAD with the Jolida hybrid 1501A. They can be found for as little as $450 used and, I think", sound ten times better than NAD. And NADs do sound good for the money.

When I replaced my NAD with the Jolida it made the system really come to life beyond my expectations.
steveaudio
331 posts
 
1. It sounds like your only source is CD, is that correct? If so, why not do what (it sounds like) you really want to do & get the best power amp you can afford--& plan on getting a CDP w/built in volume control.

2. I'm sure you realize you can move up in quality a LOT by buying used. For less than $1000 used you can get a C-J MF2250 (SS), or a VTL ST-85 (tube), both sweet power amps for the $$ (just 2 out of many many ideas I'm sure).

3. Totally contradicting what I said in (1), I agree with those urging you towards an integrated. Saying that "Integrateds are ultimately a compromise at some level"......well, yeah, at SOME level, sure, probably. But I think that level is a long way from anything you're even contemplating now. What about a used Classe' 150 or 151 Integrated? You can use either the pre-amp or power amp section separately, so you can try out different pre-amps (or power amps) when you get the urge......
swampwalker's avatar
swampwalker
5,138 posts
 
YOu might want to consider some of the tube amps with volume control (a "one source" integrated you might say). At $1000US used, there are some pretty good products out there, including Sophias, and maybe if you are lucky, a Cary. New, there are lots of Chinese products out there, including Cayin, ASL, Jolida, Ming-Da, etc. Not familiar w/the efficiency/impedence curve of your speakers, but if you went used in this product range you save $ on ICs and pre, and maybe get enough to upgrade your source. The Cayin 30 is pretty well received integrated and can be bought new for about $800US.
dmitrydr
221 posts
 
Budget-wise, for the same money you get higher-end integrated then separates. One exception - if you need excessive power. For a price of my i-5 I could choose among several inexpensive separates. But in terms of sound quality, i-5 just belonged to another, significantly higher level of refinement.
Also, the required interconnects go from the same budget, which also lowers possible choices. Just my 2 cents.
philjolet's avatar
philjolet
2,306 posts
 
I strongly recommend Audio Note Oto (SET) integrated amplifier - while rated at only 9 watts this little amp will power a normal effeciency speaker to decent levels.
More to discover