Bi-amping with no pre-outs


I would like to add an amp to push the woofers in my NHT 2.4�s, but my receiver has no pre-amp outs. What it does have however is a single sub out, which I use for its intended purpose and would like to know if it is possible to split the signal for bi-amping purposes? Possibly to an Adcom GFA...
dcconners
Just put a "Y" cable on the sub out and send the signal to the left and right amp inputs then connect the subs. You will be using the crossover in the receiver.
Maybe I'm missing something. If he wants to bi amp why not use a Y cable on the pre out to split the signal to the second amp. Assuming he is drivng the top or bottom of a full range speaker this is a no brainer. If however he wants to drive a second sub then just put the Y on the sub out. In any event get a good Y cable or jumber. I biamp my home theater coming out of a lexicon with no degradation. Hope this helps.

Walkelin
09-30-04: Walkelin: "Maybe I'm missing something. If he wants to bi amp why not use a Y cable on the pre out to split the signal to the second amp."

You missed: "but my receiver has no pre-amp outs."