2. amps-preamps
  3. 1102466530

Here we go again ... driving B&W N802s

I'm a music hound, but no audiophile. That said, I have read a lot here, and learned much from the forum threads. Thank you.

Starting a new system, based on Nautilus 802s. Next step is power, and it's time to consider specific models. It seems that, in no order, Krell and Plinius are most preferred, followed by Bryston, Jeff Rowland, and Pass/Threshold. I've learned bi-amping is best but not necessary, and if not bi-amping, then bi-wiring. And that at least 200 watts per speaker is required, and at least 300 preferred. Despite my many hours of reading, I must say I'm overwhelmed with the choices, but enjoying the process nonetheless.

So now I humbly subject myself to the collective Audiogon wisdom ... what used amp(s) and pre-amp do you recommend for a total buy of up to ROUGHLY $4,000?

Other details ... 300 sf room, plan to own equipment a long time, listen to symphonic, blues, jazz, and rock. And it would be nice to have phono input.
maxtiel
audiobugged
528 posts
 
A pair of Bryston 7b-st's at 500 wpc, & a Bp-20/25 pre would open up the N802's & make them sing within your budget.
uriah
41 posts
 
I would recomend going with a used Classe CA-300, Ca-400, Ca-301, or the Ca-401. I'm using a Ca-400 with excellent results on my new N802's. Because of the 802's revealing nature I would stay away from bright sounding anp's and I think the Classe's are a great match for your speaker. Classe amp's also work quite well with number of different preamp's but you could look into their preamp's as well and you should have a great match worth keeping. Remember, your speaker's main concern is power and current.
jeffjarvis
257 posts
 
A second hand Mcintosh MA6900 integrated can be had for about $2800.
You can easily re-sell it when you have enough funds to go for the seperates.
audiobugged
528 posts
 
There is this great synergy with the Brit. Bowers-n-Wilkins, & Canadian manufacturers such as Bryston, Classe, & Sim Audio. From my experience with the N802's you will need a steady diet of high power solid state juice to get the them to a foot taping, finger snaping state. Good Luck
rhljazz
1,255 posts
 
There is a VAC PA100 offered now that sounds far better than Classe, Krell, Levinson, or Linn which are the other amps I have experienced with N802's. The VAC has plenty of power for loud listening without the"dentist drill" irritation of solid state, is compact, and puts out no more heat than a big solid state amp.
More to discover