VTL vs Jolida

You need a lot of voltage swung in order to get the Maggies and probably M-Ls to sing and tube amps are not the most efficient at this task. I'd look to something more amp and room friendly like ProAcs, Merlins, Silverlines, etc.

Hi,
I have alot of recent listening experience regarding the amps and speakers in question. I have two other threads running at the moment.

First, to answer your question, VTL vs. Jolida, I think I would concur with my fellow compatriots that the answer is VTL, and I would agree with most of the comments already made. I think VTL is generally articulate, and powerful and everything you want a tube amp to be... that's in the sweetspot of the tube spectrum. I'm powering Maggie 3.6s with used VTL MB450 Signature monoblocks (six years old). I will also say that I've heard the Jolidas (3000 monos) sound really good with the Maggies as well. But as one of your prior posts mentioned (I think it was tomryan), the Jolidas are going to sound very tubey (the tubey end of the spectrum), whereas I think VTL probably sits in the center of tube sound, while maybe ARC sounds on the lean end (closer to ss) of tube sound. And yes, VTL comes from Southern California.

You might consider looking for a powerful pair of used VTLs on A-gon.

Also, if you go electrostatic or planar, (as everyone on A-gon will tell you) err on the side of more power rather than less. I think more power will positively influence the quality of your sound more so than the ss vs. tube question.

As for the speakers, I've always had a thing for electrostatics and planars. They just produce a different sound than what comes out of a box. I started searching for Martin Logans almost a year ago and auditioned Ascents and Odysseys at three different stores. They all sounded fantastic, though I thought the Ascents were a better price point. I was just about to pull the trigger on the Ascents when I finally came across the Maggies. And that was it. The first time I heard them, I was sold. I think the Maggies just presented a truer musical sound with less coloring and more life. The Martin Logans (all of them) have a certain sonic character or color to them. Don't get me wrong, Martin Logans are fantastic speakers, I do think they're exceptionally well made -probably better than the maggies- and they are esthetically unique. I don't think you could ge wrong with either the MLs or the Maggies. They both sound great! It's a personal listening preference. Opt for the sound that makes you emotional.... forget about what idiots like me will tell you.

For me, Maggies and powerful tubes are a hard combination to beat.

by the way, nice post above - Thanks

This post addresses "Angelsmtn" post more than anything else:-

Well, I have not heard VTL amps thus far so I cannot say how a JoLida would sound vs. a VTL.
However, I do own the 502A stereo power amp which is rated @ 60W/ch. It's an inexpensive power amp. For the price I paid for it used, it has very good sound as a stock unit. I had the parts modified & in bargain my friend put in new preamp & driver tubes (you can read the description in my Bedroom virtual system). My intention to modify it was always there from the 1st day I got this amp.
After modification I can compare the 2 sounds: the stock sound was dark or brooding as my modifier friend said. There was plenty of bass but it was thick. The top end was present but missing lustre. After modification, all these bad things are gone! The amp sounds quick, etc, etc (once again read my comments post modification in my Bedroom virtual system. I won't bore you by repeating it here). I have not yet tried KT88s, which can be used as output tubes without changing the circuitry & by only changing the bias manually thru an external pot.

So, what I want to say is that, if you know what you are doing, you can modify or have the JoLida modified (if you don't know what you are doing! :-) ) to sound immensely better & far more neutral than you can ever image a JoLida sounding. This tube amp seems to have basically a good pedigree/design & responds superbly to modifications.

I would say that whichever amp you end up buying don't use it stock over the long term - you are doing yourself a big disfavour. Even the big VTL amps will respond to mods (esp. power supply mods) & will sound much better post mod.

Now, there might not be a JoLida amp w/ sufficient power to drive B&Ws or Martin-Logans, which might rule JoLida out on the power output basis rather than on the "tubey" basis.

Bombaywalla brings up an interesting point. Modifications. I'll be honest with you in that I am torn on this issue. The whole business of "modifications" is new to me as I have re-rentered audiophiledom. First, I will agree that mods can make a world of difference. And if you know what you're doing, you can use mods to get great (or better) sound out of audio gear and work the economics to your advantage.

I have not had such an experience with mods, and some of my gear is modified (the maggies). I think there are experts who really know how to make good mods. And I also think there are folks who have figured out how to just make a living on this. I understand that high-end audio dealers probably only make about 30% margin. And I get the sense that dealers who do mods can probably double their margin. This doesn't really bother me in as much as people have to make a living. What bothers me is that I've dealt with dealers who have modified literally everything in the store. So, they can guarantee that not only will you Not leave the store paying retail or less, but they're actually justifying retail plus 30-50% for the mods. When I take a step back, I realize that these people just have a racket going. They sell only high-end equipment, but they're saying is that Maggie, VAC, VTL, Avant Garde, and of course the Japanese/Chinese stuff isn't good enough.... without their modifications. Isn't good enough as is!?... Further, I don't believe these people can possibly be experts on all this gear. They muck around and maybe they get some of the gear to sound better. But at what price? Since they're the only ones who know the mods, you have to go back to them for the service, because even the manufacturer doesn't know what the hell they've done. So, the racket continues.

As you can see, this gets on my nerves. Bombaywalla, I'm sure that you're a sharp enough person that you can work the modification angle to your advantage. And I applaud you for that. I don't think I can work the mod angle to my advantage in that way. Others may have difficulty as well. For me, I'm a better business man than alot of these dealers. I'm much better at figuring out exactly what I want; then I'll figure out a way to work down the price. I guess I don't want to spend any more time than necessary searching for nirvana.