2. cables
  3. 1422126502

Anyone else making their own cables?

Over the years I have owned a lot of different brands of very sought after and very expensive cables(interconnections both balanced and single ended and speaker cables). Each time selling and then trying another. I recently have been experimenting with making my own. I have been doing a lot of reading on the subject of design. Also I have been dissecting some old inexpensive ones I had lying around. I am starting with ic's. From my experience and what I have read, when done right balanced is the superior method. What I had not realized is that single ended cables can be balanced as well. In fact Annolog(vinyl) starts out as balanced. This is the way I have chosen to make my cables. Also I have found that grounding at the receiving end and simply connecting the grounds at the sending side works best and in my view is the only real reason for directional cables. I have been using wbt and eichmann ends. I would like to hear from others with knowledge of design, cable types and materials, soldering, end type(brands) and their benefits and covers to improve final appearance. I would also be interested in any other point I have not mentioned or to simply disagree with any assertion I or anyone else makes on this subject. I do realize that cables are the single most controversial subject in this hobby. I am not trying to settle that argument. Just offer another option. It may even prove cheaper to buy a brand cable then make your own. I do not have a degree in engerneering nor am I an electrician or computer genius. Just a long time audiophile. My single ended cables are for vinyl set up(turntable to step up transformer to phono stage). Balanced everywhere else. My system is fully balanced(as earlier described) from end to end. Thanks for informative insights.
128x128pkoegz
philjolet's avatar
philjolet
2,306 posts
 
you may want to post on AA cable asylum there are many DIYers. Duster seems to know his stuff but there are many others.

fwiw
mitch2
4,007 posts
 
Constructing your own cables can be rewarding, fun and educational. IMO you are off to a good start by;

1. owning a lot of different brands of very sought after and very expensive cables,
2. experimenting with making your own,
3. doing a lot of reading on the subject of design,
4. dissecting some old inexpensive cable you had lying around, and
5. realizing the benefit of balanced construction, whether for balanced or single-ended cables.

I have taken apart more than a few manufactured cables and what I typically learn is that (other than those with network boxes, active dbs, etc.) cables are basically wire, insulation, geometry and connectors. Several have been quite disappointing in how uninspiring the construction was, compared to the marketing hype.

In my experience the most important attributes, in order of most important to least important, are wire gauge and geometry; wire material, metallurgy, purity, and processing; wire insulation; connectors and method used to attach the connectors; cable length; cryo and/or magnetic treatment, and cable conditioning with active signals (e.g., cable cooker). Cable routing between equipment is also important.

The main advantages of manufactured cables are the R&D that goes into choosing the final materials and geometery, and the uniformity of construction that is somewhat beyond what can be achieved by a typical DIY construction. One way I have found to remove the uniformity issue is to construct DIY cables by terminating some of the excellent bulk wire/cable available through on-line vendors. Although, I also believe a carefully constructed DIY cable, using good materials and geometry, can beat many of the manufactured cables out there.

Good luck. Keep us posted on your progress and results. Also, as Phil says, you may get more activity on a post like this over at AA cable asylum.
sabai
2,027 posts
 
Pkoegz,

I make my own cables -- balanced ICs, speaker wires and PCs. I run the ICs in series with Elrod and Shunyata and the PCs in series with Shunyata.
raymonda
855 posts
 
I've basically stopped buying commercial cables years ago, not a good value IMO, and instead went to making my own, much better value and much better results vs cost.

You can make a kick ars cable for under $100 that would cost you $700-2500 from a cable company.Y(EARS)MV, but you should give it a try.
More to discover