2. tech-talk
  3. 1010284085

Help/Major Problem

I have a Aleph-3 amp and a Rogue 99 pre with phono.
I played the system all last eve. with no problems.
Tonight I fired it up and nothing!
All seems fine except no sound.Only a muted signal(music) when I turn the pre way up.I can see the line stage tubes through the cover of the 99 and they are lit up.This problem is with phono,CD and tuner.I have checked all I.C.'s and P.C.'s All check out fine.
What the hell could be the problem?
128x128david99
david99's avatar
david99 OP
1,467 posts
 
I have checked all there is to check without opening up the Rogue to check the tubes.
One correction from my previous post.I get a signal with the pre turned all the way down.Very low,muted music that increases slightly when I turn the pre up.All cables and I.C.'s are fine.
glen's avatar
glen
714 posts
 
Have you tried rebooting your pre? Different pre's have different procedures. I have had this same problem with several different pieces. Usually turning everything off wait a minute then bring it back up does the trick. Check your manual for other variations. Good luck and DON'T PANIC!!!
david99's avatar
david99 OP
1,467 posts
 
DONT PANIC??!!??
david99's avatar
david99 OP
1,467 posts
 
I tried 'rebooting' several times tonight...no luck :^(
cornfedboy
1,645 posts
 
david: have you checked ALL fuses, including any internal rail or input varieties? (don't really know what your rouge or pass have for "protection.") if all else fails, PANIC, take a couple of ludes and see what tomorrow brings. -kelly
More to discover