Wall Outlets? Whats the difference?

I noticed an improvement when going to hospital grade outlets. Even commercial grade 20 amp outlets at 3.50 each are much better than stock, as noted above, much better grip and greater contact area.

I would certainly love it if someone could explain to me the difference between a good hospital grade outlet at 15.00 (from your local electral supply house) and PS Audio's and the other "audiophile" grade 50.00 ones. I can't see any rational at all in spending that much money on an outlet. But maybe someone out there as done a direct comparison and could enlighten us. Remember, when buying the hospital grade receptacle, DON'T tell them you're an audiophile :)

To me money would be much better spent by installing a 20 amp dedicated circuit or two. Cost for materials, including 2 hospital grade outlets, for a 50' run is about 60-70 bucks each circuit, and that is using 10 gauge romex instead of 12 gauge. No part of any system is greater than its weakest link. It is more important to look at the complete circuit and all materials used than any one single part.

I picked up a pair of Jena Labs Cryo outlets, they are a 15A/20A outlet..I have my monoblocks on them..I have to say I did not hear a difference compared to the Hospital Grade 20A plugs I had before..

Matt

I have just upgraded to the PS Audio Power Port from Hubbell hospital grade, on my amp only. I have a dedicated 20A line for my amp, and a JPS Labs Power AC. I bought only one Power Port, Tubegroover, because I am a skeptic, and I figured this was unlikely to make an audible difference. But I'm also a sucker for cheap tweaks, and while $50 is a ton for an outlet, it's only $50. The jury is still out, but I think I'm hearing a bit blacker backgrounds, and a bit more depth. No earth-moving epiphany, for sure, but it's only been a couple of weeks. If I decide it's worth it, I may another in front of my front end line conditioner.

Any PS300 owners who upgraded to Power Ports?

Hi Whknopp, I wanted to try the JPS AC wire for my dedicated line, but at $18 per foot for a 55' run I went for an alternative. Getting 8AWG into the power port was a
(probably unnecessary) pain in the arse. If it looks like there's a good possibility that the JPS is better than the twisted silver plated, stranded, teflon insulated stuff I used it shouldn't be too tough to replace. The outlet and the AC wire got changed at the same time, so the improvement I heard (inreased clarity, quieter background)can't be entirely credited to the outlet.