5 amp, 600 watt is not enough. 15 amps might be minimum, 20+ is better, for wattage look on the rear panels or in the manuals of all your gear and add up the draw. 600 may be enough for the sources, but not for the power amps too.
Low Voltage on Circuit
Just tested the Voltage coming out of my wall and it was 112.7 V. This is obviously too low to feed my 120V tube monoblocs and my tubed pre amp. For about a week when I turned on my equipment it would shut off after about 30 seconds of play. I stumbled for a few days trying to isolate the problem but kept running in circles. I then took a trip to get a multimeter and tested the juice from the wall. Please let me know how to fix this, preferably with an inexpensive step up transformer or other solution that can be done DIY for under $100. My associated equipment all on the same circuit is:
Rogue Audio Magnum M120 Monoblocs (120Watts)
DIY pre amp using 2 6SN7 tubes
EAD Ultradisk 2000 CDP
Rogue Audio Magnum M120 Monoblocs (120Watts)
DIY pre amp using 2 6SN7 tubes
EAD Ultradisk 2000 CDP
- ...
- 26 posts total
- 26 posts total