Help with Buzzing in Speakers

Let me add this:1. You may want to try moving the player further away from the processor. 2) try a different wall plug for one of the two involved components. 3) Check to make sure you don't have a "rat's nest" with your cables. 4) Try a different digital cable (are you using F.O. or coax?) 5) Refrain from cursing if this doesn't work - haha - Good luck and hope one of these suggestions works!

Treyhoss thanks a bunch I will troubleshoot with your suggestions. To add info for you I have a DVD 05 and a Muse 2 dac. The buzzing was occurring before I added the dac so I don't think its the dac, I think it is the 800 processor. I reset the 800 to factory default setting and the buzz dissappeared but after about 4 hours it came back, sounds like a warm up problem with the 800 you think? I use a panamax 1000+ line conditioner/surge protector, any thing I can check to see if it is the problem. Thanks again for all your help. Rick.

It does sound like a thermal problem. Try putting the processor on tip toes and don't put anything on top of it. The tip toes will not only provide improved stability but will allow for better air circulation around the unit. I use these on my amps, processor(s) and transport. You should only require 3 of them set up in a triangular configuration to create a plane. If that doesn't work then send the unit back if it's still under warranty. I know the latter is a pain but.... If it isn't under warranty, try opening the cover and carefully, using compressed air(from a distance), blow out the circuit board. You may have some dust in there although this would be a last resort. Good luck.