Hum from Florescent light

Trelja- I had some TARA Labs interconnects which picked up 60 Hz AC hum. Replacing them with Audioquest Coral fixed the problem.

jayboard: halogen is as bad, or worse, than flourescent for use near any electronic equipment. try putting a halogen lamp near your computer monitor and you'll likely see the effect. i recommend you buy a littllite (sp?) for your turntable, which are widely available.

I leaned something also, thanks guys. Never had a bad hum problem that a power conditioner did not fix, so I thought that some little filter might work, since he said "cheap and easy". BY THE WAY I USE A BATTERY POWERED LIGHT NEAR MY SYSTEM. Only turn it on when needed.

Trelja, I know this may sound whacky but try turning around your interconnects. Some of them have the shield grounded at one end only. If the shield is not finding a connection to ground it is not serving as a shield at all. Give it a try. If it works it will be the least expensive tweak you have ever made, if not I am afraid new interconnects may be in your future. Let me know if you have any luck.

Trelja, Sorry, just had another thought pop into this thick skull of mine. If the interconnects are connected to your preamp this may be worth a look. On my preamp there is a terminal for a ground connection. Verify that you have a wire connected between earth ground and this terminal. From your previous posts, I know you are very knowlegable so I know you probably have this connected, but maybe it is loose or fell off. If the ground wire is not connected or loose, the interconnect shields may not be getting grounded. Just another thought my my warped mind. Good luck!