iTunes star ratings, play count, playlist info


After incredible hassles with several LaCie Terabyte drives (on the Mac), I bit the bullet and bought an Xserve RAID. I have moved the iTunes library to the RAID.

It is, of course, easy to designate the RAID volume as the new library and add the songs, but does anyone have any idea how I can designate one of the RAID volumes as the new iTunes library location but still keep the info that is unique to the old iTunes library, such as star rating, play count, and play lists?

Thanks!

Ed
edumke
At this stage, I've had three drive crashes in less than two years--one internal Western Digital, one Maxstor external, and one LaCie external. Add in CRC read errors and 2% of the data being unrecoverable on a fourth Lacie drive, and it makes me think I'm taxing the limits of normal consumer technology. While I agree that the xServe offers excessive processing power for a dedicated NAS, its the cheapest RAID 5 storage unit that is intended for a 24x7 commercial environment...

I thought about the fact that I could get five of the buffalo terastations for the same $ as the xServe. But, it's still leaving me feeling kinda exposed. Maybe I'll change my mind tomorrow (today was the day that 300 CDs painstakingly ripped into WAV format disappeared)...

What else do you use your server to do? I had previously ordered a miniMac that I was going to attach to the main stereo/video rig to run iTunes and get WAVs off the xServe. I've also got an elgato eyeTV 500 on order and will see about recording some off-air HD onto the server. But, the server is still acting like NAS...
I know the feeling of just wanting your data to be safe. I really don't want to have to re-rip all those CDs, let alone the impossibility of retaking ten thousand photos!

I have my RAID set up as a local disk on my G5. In other words, I don't have a server at all. The RAID volumes just show up on my desktop as local drives. They never have to spin up, they are just always there.

One interesting note about RAID. A RAID is actually less RELIABLE than a normal disk.

If you take 14 hard drives (ignore the controller for now), each with a Mean Time Between Failure of 500,000 hours each and tie them all together. You get a system with a MTBF of only 35,714 hours! A decrease in reliability of 93%. What makes RAID 5 (with distributed parity information) so great is that it is FAULT TOLERANT.

In theory anyway, my RAID can have 4 drives, one controller, one power supply, one cooling fan, and one UPS all fail all at the same time without losing data. I have a far greater chance of having some failure than just a single disk drive with a MTBF of 500,000 hours. The difference is that when I have a failure, it is likely that it won't be catastrophic.
I don't mind replacing the drives, so I'm more worried about mean time between catastrophic failures. Which, right now, seems to be about 6 mo. for me.

I've poked around some more, and may end up with a Dell PowerVault 775N. It's enterprise grade, but maxes out at 4 x 250 GB drives; with RAID 5, that gets me only 0.75 TB, but that should hold me a while. Would be nice to have the hot standby, but I think my solution may be to get a spare drive and have it available...

I did look at the Lacie NAS, as well as others by Snap and Weibe...