Power Conditioners to reduce Sibilance

Like I said it's your room - you know it and I know it. You can get conditioners, DACs, etc and you will have a great system - but flutter echo and brightness will continue to destroy the sound.

I just don't want you to throw all your money away and find yourself in the same spot.

Thanks again for all your responses. I toed-in the speakers such that they cross before the sweet spot and much of the brightness and sibilance have been reduced but not eliminated. I have plans to add some canvas prints behind the speakers in order to reduce the wall reflections. A RGPC power conditioner is something that I will look into purchasing in the future but clearly the room and the speaker placement was the large source of my problems. As far as changing cables and ICs, I use mostly XLO ultra and signature which are expensive for those who are still recieving education and I would prefer not to experiment with new cables. This is my 3rd pair of B&W speakers as a result of my dealers trade-up program and I definitely enjoy their sound. Nevertheless, the metal dome tweeters can interfere with the sound of the music by being overly bright and forward and require a great deal of attention in order to tame them. Once again, I appreciate all of the feedback as this was the first thread I have attempted on this site. Given the useful information I have recieved I will continue to use this as a resource in the future.

AdamG

While I cannot argue with any of the suggestions above, I believe there is no "universal" right answer as to what is causing the sibilence in YOUR system.

I have been chasing a sibilence problem in my system, taking the suggestion that room treatment should be the primary target. I chased my tail with treating first reflections, rear wall reflections, covering all windows, etc.

Then it dawned on me to conduct a simple troubleshooting test.....I used headphones hooked to the tape out of my ARC SP8 preamp. I figured that would take the room acoustics out of the equation. Put on a troublesome LP, and the sibilence was still there. So my problem in my system is somewhere between the turntable, cartridge, I/Cs, and preamp. It is not the room.

So, I'm now changing out I/Cs between the TT and preamp to see if I can solve this.

The moral of the story....I dunno....keep trying! ;-)

I doubt cables will make a difference.

Adam, I know there isn't much faith in cables changing the sound of your system, but I decided to mention this to you anyway....
Is your speaker cable a bi-wired pair?
If not you must be using the B&W jumpers? My speakers sounded terrible with a single run of speaker cable using B&W jumpers. Midrange and trebble were out of control. I changed to same cable but a bi-wired pair and I could not beleive the improvement. At least with my speakers, I noticed a huge difference. If you have someone to lend you a pair of bi-wire cables, try 'em out. See if that will change anything. It was a big and positive change with my N803s.