Lovan: Stereophile recommended disappointment.

had similar experience with furniture works...bought a nice rack on closeout...looked great and worked fine...until one of the legs shatterred and the wheel flew off!. thank goodness i was there when it happenned or i would have lost everything. the store, harvey electronics not only wouldnt help me but said they didnt have the number for the company because they were no longer a vendor! they would however gine me a discount on another piece. if anyone has a number for furniture works i would appreciate it.

About a year ago I bought a set of Lovan Sovereign racks because they look good. Only after I took delivery I discovered that they were poorly made, the legs were out of alignment in one or two of the shelves that I could not stack them up at all. My dealer ordered another set for me - and guess - similar alignment issue existed. Eventually he allowed me to mix-and-match the shelves until I was able to assemble a properly stacked racks. I have no problem with the wooden boards though.

Wow - a lot of vitriol with respect to Lovan racks. I admit, they are not the greatest, but at least the Sovereign model can be improved if you take certain steps.

First, replace the shelves with something custom made - the MDF shelves are garbage, and the glass shelf sounds steely (and is expensive to boot). I recommend either acrylic or corian. Alternatively, maple or other hard wood of at least one inch thickness could be used as shelf material. Next, use some constrained layer damping material between the shelf and the frame (as opposed to those circular felt/sticky pads). The frame should be filled with a combination of lead shot and sand. Finally, if you are adventurous, put a set of pro MIBs under the four feet.

Admittedly, the above changes raise the price of the racks to almost double the list price, but it works pretty well, and is still much cheaper than any of the "real" high end racks.

Fran:

Here is a $200 rack that has adjustable upturned brass spikes for all of the shelves. It looks to be pretty much the same as my older Studio Tech.

http://www.racksandstands.com/asp/show_detail.asp?catid=38&sku=SO0002

Other than upgrading the shelves my easy tweak was to mig weld the frame into a one piece unit. I did it for free @ my auto mechanic's shop and the welds (16 total) took but a few minutes. One piece racks with adjustable spikes for the top shelf (only) cost hundreds of more dollars and from what I have seen in local showrooms are not as square as mine (I set it up on a sheet of glass, sans floor spikes, before having it welded).

Studio Tech stopped production of the models with adjustable shelf spikes shortly after I purchased mine (a few years ago), but it looks like they are back.