halogen lighting?

I have the answer your looking for! We just finished remodling the den, which is where the audio & projection systems are located. My electrician promised me that the low voltage lighting (12 volt) he would put in wouldn't make any sound. Well, I went along with his suggestion, and he was right! He used a unit made by "Elco". I believe the modle number is EL1499R. The cost was just under $26 each at the electrical supply. Each unit has its own transformer, but I can't hear any sound comming from them, and neither can anyone else! The dimmer that we're using is made by Lutron, and is called the "Spacer System". Very cool dimmer; works off an IR remote, and can be programmed for 4 different lighting levels. Hope this helps! Ken

Ken, sounds like you're into h.t., maybe more than just stereo? I'm curious what your system is?
jb

I've been into high-end audio since the mid 70's. My "current" system is pretty much a full blown Cello system, complete with a pair of Grandmasters. During this most recent remodeling job, we ran 5 dedicated 20 amp lines into the den, and used the Cryo-treated Hubbells for the outlets - a huge difference in bass response! As far as the projector goes, I installed a Sanyo PLV-70 into the ceiling, and project it on a Stewart Firehawk screen. The quality of the projected image is awsome, but my true obsession remains two channel audio...

Ken,
Thanks, that really helps clarify things. Obviously, with your system you would clearly hear any "hum" coming from your dimmers. I will see if I can locate those switches. I can't help wondering if the cryo hubbles didn't also help? I just order 4 myself from Albert Porter.
Thanks Again

Joeb:
I think I may have confused you: The dedicated lines with the Hubbells are for the audio & video systems ONLY. Do NOT run the lighting on the same circuts you are running for the audio system - keep them separated, and preferrably far apart! By the way, you will find that Albert Porter is a prince of a guy to deal with, he was kind enough to Cryo-treat some Hubbells I already had a couple of months ago. Additionally, Bob Bundus & Ernie (Subaruguru) who both answered your thread, have each forgotten more than I'll ever know about the technical side of audio. I think my experience with the low-voltage lighting not making any noise was purely dumb luck! Good luck with your project. Ken G.