Should I upgrade my SME 3009 III tonearm?


I getting back into vinyl after a long hiatus. Along with 6000 jazz LP's I inherited a never-been-used SME 3009 III tonearm. I was planning to mount it on a VPI HW19 MK IV turntable but had second thoughts after talking to VPI. Basically I was told that the SME arm wouldn't perform as well as even the cheapest of arms available today. I found that hard to believe. For many years I used a SME 3009 II arm/Shure V15 III combination on an Ariston RD11S turntable. It performed very very well and I was a happy camper. I've read recent reviews for more up-to-date arms and I'm not impressed. The reviewers use alot of colorful babble but say little of substance. As for auditioning arms, my part of Ohio dosent seem to have any high-end audio dealers that are up to the task. Anyone have any advice?
black_archer
Hey, if you like it, then use it.

I do think that you could get a significant upgrade for not alot of money. Like $200 for a Rega RB250.

Do what suits you best.
Put a new shure v15 mkVxmr in the SME and you should be fine. You may want to upgrade the interconnect if you can.
That seems like a pretty harsh statement from VPI. I have to concede though that SME along with everyone else had made significant technological advances since the 3009 arrived on the scene.

Does SME still sell the 3009? That would tell you right off the bat what they think of the arm.

I do have to agree with Tom. There are lots of good arms out there now. The Mk IV is a pretty good table so you would probably be better served by getting a better arm. I think you could have an amazing setup if you bought an arm of equal quality to the TT. The Rega RB 900 provides fantastic sound but at a price much more palatable to the average consumer.

Good luck in your hunt, and have fun with 'all that jazz.'
Post removed