2. misc-audio
  3. 1078727040

Damping Vibration - Friend or Foe?


Hi All,

I have been reading many discussions regarding the use of damping in and around audio components here on Audiogon. I thought that the following discussion from the FAQ page of my company’s website would add a little clarity. The example here involves a home theater system but the same principles hold true for an audio only system.

Question: Some people claim that adding damping to components to control vibration can sometimes make them sound less dynamic and somewhat lifeless. Why should this be so when damping reduces the problems of vibration and resonance?

Answer: I have also heard the same comments a number of times. Unfortunately, people mistakenly attribute these negative changes in performance solely to the addition of damping to a component. If we look at the entire evolution of an audio or video system we can gain a much more clear understanding of what is happening and why it is happening.

Let’s say that John, who is an audio and video enthusiast, decides to put together a really nice home theater system. He reads a number of magazines, visits websites devoted to these topics and assembles a system composed of many highly rated components. John sits down to enjoy a well produced action movie but a few minutes into the first scene realizes that he’s not hearing or seeing what’s been described in the magazines by the reviewers. The highs are bright and harsh, the midrange is forward and the bass is bloated and ill defined. The video picture is also disappointing – the images are not very sharp or detailed, it looks rather two dimensional and the color is only so-so. What’s going on? These are all really good and pretty expensive components!

John decides to try different interconnect and speaker cables to deal with the audio problems. After two or three weeks of trying a number of different brands he decides on Brand X between the converter and the surround processor (it had the smoothest highs) Brand Y between the processor and the amplifiers (it had the best midrange) and Brand Z to the subwoofer (it had much better bass). In addition, he spent a many hours trying different speaker positions. It also happened that the cable between the DVD player and the video projector John chose was from Brand X - it reduced many of the video problems he was seeing. He then had a technician come out and recalibrate the projector for this new cable. Now John is happier with the system, after all, he even switched the front amp for a different brand. But after a few weeks he is still noticing that the highs have sibilance during loud passages, are still kind of bright, and the midrange, although better than before, still honks a little and is not that distinct on complex dialog. Plus imaging is good but not great. The bass is better but he’s had to try the subwoofer in nine or ten different positions and, of course, the one that sounded best was right in the middle of the walkway!

John is bummed but starts thinking about acoustical treatment for his room and decides that adding some of that will surely make the system sound great. He borrows a bunch of different devices from a number of dealers and spends all day and night Saturday and Sunday trying all of the devices in different combinations and positions. By 11:59 P.M. on Sunday night he’s finally found the best compromise that takes care of many of the other audio problems, although some still remain.

All this work has left John exhausted but happy for a couple of months. He can now at least enjoy watching movies but increasingly is annoyed by the remaining audio and video problems. Over time he’s also noticed some new problems he hadn’t noticed before!

Well, now what? John does more reading. He’s read about vibration control before but now starts to think more seriously about it. He knows that Brand B’s products (high-mass and high-absorption damping devices) get great reviews and have won lots of awards so he decides to try them. He places a compliant decoupling platform on the shelf, a high-mass and high-absorption isolation platform on top of the compliant platform, the DVD player on top of the high-mass platform and a high-mass damping pod on top of the DVD player and the surround processor. Well just about all of the remaining audio and video problems are now gone – the highs are very smooth, the midrange is clear and the bass is much tighter, the video picture is far better – but somehow things sound constricted and lifeless. John likes the improvements but is not very sure that this is good thing overall.

What is really going on? As we’ve seen, John has taken a fairly convoluted road to reach the point of trying the damping products. Along the way he has made many choices of associated components, accessories and set-up to optimize the system. “Optimize“ has mostly meant reducing obvious and subtle problems and enhancing certain other aspects of performance. Unfortunately, much of this effort has been an attempt to reduce the negative audio and video artifacts of vibration contamination. The choice of cables, acoustic treatment devices, speaker position, etc. have all been made to ameliorate the SYMPTOMS, not the CAUSE of the problem – vibration! Once the cause of the problem is eliminated, the system shows itself for what it is – a system where the highs and mids have been pushed down in level and dynamic range because of acoustical treatment devices and associated components, where imaging has been manipulated by speaker position and acoustic treatment to compensate for random out-of-phase elements, where subwoofer position has been chosen as a compromise, where video calibration and associated components have been selected to compensate for vibration induced jitter and other artifacts in the video bitstream, etc., etc., etc. It is no wonder that John was under-whelmed when he added the damping devices!!

Also at issue is the fact that the designers of the components in the system have voiced their designs with vibration (most probably) present in their reference systems. They have compensated for the problems introduced by vibration and resonance by changing parts and topology to minimize the symptoms (not the cause) of that problem. It is quite possible that effectively eliminating vibration and resonance with damping is letting you REALLY hear how the component has been designed.

It is often the case that the choice of set-up, associated components, ancillary accessories, acoustic treatment, etc. has to be significantly and fundamentally reevaluated when adding devices that eliminate basic problems in a system – especially problems that are as pervasive and permeating as those brought about by unwanted vibration and resonance.

Best Regards,

Barry Kohan

Disclaimer: I am a manufacturer of vibration control products.
bright_star_audio
hifi111
34 posts
 
Barry,
Have you had any experience with Stillpoints ?
If so, what was or is your opinion on their
capabilities ? I use them under my pre-amp,
power supply, amps, and power wedge with
phenominal results to my ears.
Thanks
Thomas
bright_star_audio OP
179 posts
 
Hi Thomas,

Thank you for your questions.

We either own or have the ability to borrow virtually all of the commercially available vibration control devices on the market. We have also experimented with hundreds of different configurations and devices that have not made it to market as well as the DIY devices that are discussed on internet forums such as Audiogon.

I will refrain from making a critical assessment of any specific product from a competitor but I do make more generalized comments about the various technologies or materials employed and their capabilities and limitations.

Because there are a number of different sources and forms of vibration and resonance that are present in an audio and video system that affect the signal flowing through a component the most successful vibration control device will address all of them. Devices that only address one or two forms or sources are only partial solutions.

It is critical that a complete vibration control solution eliminate vibration that can affect a component BEFORE the contamination is allowed to occur. Once the signal flowing through a component is affected by vibration no amount of "draining" or "dissipating" can reinstate the original pristine condition of the signal. A vibration control device that is placed merely underneath a component CANNOT restrict contamination from air-borne and internally generated sources of vibration. Any vibration control device that couples the component to the support underneath it CANNOT protect the device from floor-borne vibration.

The most successful vibration control SYSTEM will:

1) Decouple the component from floor-borne vibration.

2) Minimize as much as possible the contamination component from air-borne vibration.

3) Minimize as much as possible the contamination component from internally generated vibration.

I strongly suggest that people critically assess the devices they are now using or are contemplating purchasing or making themselves to see if they meet the minimum criteria and do address ALL of the forms and sources of vibration and resonance. It is also critical that the devices (whether commercial products or DIY devices) do not contribute their own problems into the component. Selecting materials that ring (granite, marble, glass, stone, Corian, steel, etc) or materials that are resonant (natural wood, wood cutting boards, Plexiglas, acrylic, plastic, etc) for use as vibration control will FURTHER contaminate the signal and take us further away from faithfully reproducing the signal that is contained in the recording.

The above discussion is not a criticism of the Stllpoints or any other specific product.

Best Regards,

Barry Kohan
stehno
1,453 posts
 
Barry, I know we've touched on some of this before.

It would be wonderful if one's products addressed every aspect of a given issue. And perhaps this can be accomplished by some products in some industries. But I have my doubts that your products (or anybody else's in the audio industry) being capable of such things as you seem to be insinuating above.

Would you not agree that if your products were to properly address one type of vibration:

o say air-borne, then have you not just trapped the internally generated vibrations within?

o say floor-borne, then have you not just trapped all air-borne vibrations that continue to be captured by the components?

o say internally generated vibrations, then ..., well actually if you are making this claim for your products, I'm very curious how you think your products have accomplished this.

It is a fact that components in a music room WILL capture air-borne and floor-borne vibrations and they WILL generate their own internal vibrations. As far as I know it is physically impossible to completely protect a component from ALL vibration unless one were to remove the component far out and away from the room where the vibrations were occurring and/or the components were turned off.

It is also a fact that as one sits in their cushy(well-damped) listening chair feeling the vibrations from the music, one can bet dollars to doughnuts that their equipment is feeling pretty much the same vibrations regardless of whose vibration control system products are being used.

If you are claiming that your products have overcome this, then shouldn't I be able to use your products to also prevent my physical body from experiencing those same vibrations that are hammering my components? I would think this would be a relatively easy test.

I just don't see how anybody's vibration control system products can essentially be all things to all vibrations such as to kill them in their tracks BEFORE they contaminate the components like spraying bugs with a can of RAID.

-IMO
flex
292 posts
 
" It is also a fact that as one sits in their cushy(well-damped) listening chair feeling the vibrations from the music, one can bet dollars to doughnuts that their equipment is feeling pretty much the same vibrations regardless of whose vibration control system products are being used."

Though there is much to say on the whole subject, the sentence above is easy to disprove - at least in my house. Place your hand on the listening couch and you feel the whole dynamic shape of the music. This is 80-90% floorborne, as you can show by placing a screen in front of the couch to block off the direct radiation (no, that won't kill ceiling or sidewall reflections which are still there). Now, place your hand on the top chassis of your gear, which in my case sits on a Grand Prix stand. Nothing to feel. In other words, the amplitude of surviving vibration is vastly lower.
theaudiotweak
2,778 posts
 
Barry what is the bandwidth of your devices? Have you calculated a refresh rate ..at what point do your devices become saturated and then impede frequencys that follow? Tom
More to discover