Your missing the point..the less noise and distortion thats achieved in a well designed Pre-amp means far less interference to the music signal that is passing through. Feedback designs have more vibration and noise problems which is why we use heavy isolation/absorbtion racks and shelfs and isolation feet to help control the vibrations in the components to improve the quality of the music. The idea that we stick to the past designs of 35 years ago is silly. Audio engineering always improves as the years go by due to better science and technical innovations that were not applicable 35 years ago. The reason why some Preamps are made up of two or three cabinets is to isolate the power supply from the control boards to keep the noise floor and distortion lower because these Preamps are using feedback designs. The best single unit Preamps in the world that have S/N ratios over 125db's using feedforward designs are actually quieter than two or three piece Pre-amps resulting in superior musical performance since obstructing the music signal is kept to a minimum. I have not heard the Pass XP-30 but use to own the X0-1 back in 2004 and at the time also owned the Musical Fidelity 308 Preamp and the Parasound PLD-2000. The Parasound was faster than both but thinner sounding. The Pass was fuller and more laid back and the Musical Fidelity was a piece of crap.
- ...
- 77 posts total
- 77 posts total