acoustic placement/small bright room


I have been dealing with this for about 6 months at least. I have a 13 x 12' room and have been stuck with brightness, actually glare that is a pain to listen to. I have room tune that helps with the imaging but the only thing that I have found to tame the brightness somewhat is absorbtion. I put quilts on the wall, all walls to be exact and it looks like overkill. Everything that I have read on the internet seems to say that it is a bad thing. But it is absolutely necessary to make it listenable in this small room.

Question is has anyone every dealt with this anamoly? Better yet has anyone solved it?

Oh, this is not hardware related. That's usually the response I get.

Thanks,
Rob
robm321
I actually put some 4" fiber glass in the middle of each wall and it worked to tame the brightness and the aggressive midrange. Now I am going to adjust my speakers again since I had them toed out to help with brightness. I should be in good shape now.

Thanks again for the help all!

Rob
Robm321, what about carpeting? Also bookcases filled with books.
I have the same problem but refuse to turn my home into an anechoic chamber. Right now I use an equalizer. Parametric is better than graphic BTW.
What is the best placement for absorbtion? The first reflection points or behind the speakers?

Rob
Just got back to this thread. As to the poly fill, it depends on the loft. If it's a really thick quilt and the covering is natural fiber (cotton preferably), then it's probably doing a reasonable job. If it's polyester covering then it's going to reflect somewhat. Also, the loft is small, there is going to be much less absorption. Fiberglass is about the most efficient absorber, and the higher the density the more efficient it is.