Fuses that matter.


I have tried six different fuses, including some that were claimed to not be directional. I have long used the IsoClean fuses as the best I have heard. No longer! I just got two 10 amp slow-blows WiFi Tuning Supreme fuses that really cost too much but do make a major difference in my sound. I still don't understand how a fuse or its direction can alter sound reproduction for the better, but they do and the Supreme is indeed! I hear more detail in the recordings giving me a more holographic image. I also hear more of the top and bottom ends. If only you could buy them for a couple of bucks each.
tbg
05-16-12: Bryoncunningham
I found at least one amp designed by a well regarded manufacturer that includes fancy fuses: Spectron's Musician III Mk2.

Spectron's Senior Engineer, Simon Thacher, weighed in on the value of fancy fuses a while back, right here on A'gon...
It is my firm opinion that HiFi Tuning fuses are very synergistic with our amplifiers, Spectron Musician III SE. For my ears they clearly and without any question remove "gray noise" across the Spectron from high frequencies to low - making sound much more "liquid" and involving.
Hmm. Just speculating, of course, but given that Class D amplifiers can be expected to have a significant amount of RF noise running around inside them as a result of the high speed switching processes that are going on, perhaps the material used to enclose the body of the HiFi-Tuning fuses lessens the amount of that noise that is picked up by the conductor within the fuse, compared to a glass body. Or perhaps the frequency content of the noise that is picked up is at least altered to some degree.

That would seem kind of far-fetched, considering other opportunities that undoubtedly exist nearby for that noise to couple onto the AC wiring, but who knows?

Of course, there would be no reason to expect whatever significance that kind of effect might have in a Spectron Class D amplifier to have much if any applicability to other components, especially if they are not amplifiers, and Class D amplifiers in particular.

Re unplugging, if you can insert the fuse into the cap of the holder prior to inserting it into the component, and then insert the fuse + cap into the part of the holder that is mounted on the component WITHOUT TOUCHING ANY METAL on the fuse or any part of the holder, you'll be ok. If you were to first insert the fuse into the part of the holder that is mounted on the amp, intending to subsequently insert the cap over the inserted fuse, you would not necessarily escape unscathed.

Re the Louis XV menu, OMG! 145 Euros for a little over 3 ounces of 2002 Leoville Las Cases, which is probably many years away from being at its peak. Makes $80 fuses seem like a bargain :-)

Best,
-- Al
Unplugging a component from the wall and plugging it back in often results in a noticeable degradation of sound, if you're paying attention to such things, until such time as the contact between the plug and the wall socket has a chance to "reestablish" itself, which can take a few days or longer. In fact, Disturbing cables or power cords in any way should be scrupulously avoided IMO, especially during tests.

Geoff
Haven't done the math but would not surprise me if a fuse directly in the signal path in a speaker like Magnepan is more significant in terms of resistance than in an amp say and would therefore have a better chance of making a discernible difference. I might buy that and be willing to give it a try. But I would still argue that the better fuse still need not cost much more than the standard as anything labeled "audiophile" typically does. But if the results were consistently repeatable and significant enough, I would likley then be willing to pay more.

$30 for a fuse is outrageous but won't send anybody to the poor house I suppose if they are already running a big buck system.

It works from a business perspective for the audiophile tweak makers to make their case based on possible vague benefits associated with the unknown. As opposed to clearly identifiable benefit with an easy money back guarantee perhaps. How do you know until you try? Can't try until you buy! What a racket!
Bryon, Be sure that you don't have any DC on power line. Electrons in the fuse wire don't move with AC (vibrate in place) but with DC they will very slowly move (called "drift velocity") from your expensive fuse into home wiring.
Don't let expensive electrons, that you paid for, drift away!
Oh, as long as the fancy expensive fuse does not sound WORSE than the standard, most are not likely to return it even if they can. Its a $30 insurance policy essentially. No problem. Except the seller made a huge profit for nothing. Everyone's happy but especially the guy who made a huge profit on a cheap placebo tweak.