2. amps-preamps
  3. 1335381323

Fuses that matter.

I have tried six different fuses, including some that were claimed to not be directional. I have long used the IsoClean fuses as the best I have heard. No longer! I just got two 10 amp slow-blows WiFi Tuning Supreme fuses that really cost too much but do make a major difference in my sound. I still don't understand how a fuse or its direction can alter sound reproduction for the better, but they do and the Supreme is indeed! I hear more detail in the recordings giving me a more holographic image. I also hear more of the top and bottom ends. If only you could buy them for a couple of bucks each.
tbg
marqmike
839 posts
 
Polyglot please post back when you get those Liquid Nanos in and broke in. Thank you.
tbg OP
5,263 posts
 
Polyglot, I didn't find that to be the case.
knghifi
1,668 posts
 
12-23-12: Polyglot
>>Avatar is the AMR North American distributor that I contacted. Still no reply.

Ditto, after sending a couple of reminder emails and voice mails I gave up and ordered Liquid Nanos, hopefully bettering my HiFi Supremes.
Polyglot (Threads | Answers | This Thread)
Interesting, I thought they only blow one off inquiring warranty work.

Marqmike, from my experience, Liquid Nanos adds a bloom to the sound compared to Supremes that is advantageous in some systems.
lacee
811 posts
 
Still no reply from Avatar(AMR), so the Supreme fuses went back in.
I had forgotten what they contributed to my enjoyment.
Took the WA chips off the stock fuses and re-applied to the Supremes.Don't do this too many times,less sticky each time you re-place them.

To sum up, until I can source some AMR fuses( slo blo-large size-.5 amp, and 5amp-two of each), the Supremes reign supreme in my system.

Going from stcok WA chipped fuse to WA chip Supremes was like changing to a nice tube amp from a decent solid state amp.

Or, I could say, it made my tube amps sound like better tube amps.
krell_man
827 posts
 

Lacee,

I found that the chips didn't want to stay wrapped around the fuses. So I bought a chip for each fuse, put them on the fuses and then placed scotch tape over them to hold them down.

At only $9.00 a piece, I thought going that route was easier than trying to apply and reapply the chips.

As far a receiving a response from Avatar, I'll email Darren and Bonnie and let them know about all of this.

Chuck
More to discover