Newbie with "bright" system

I think that the Truthlinks are a good choice. Or maybe some Alpha Core Sapphire's. I don't think that I would recommend the X-10D. I does soften up the sound a bit but it muddles the clarity. It is a good fix for the cheapest CD players until you can afford a good. But yours is above that. Also, when I had some Acurus amps. the Harmonic Tech Pro-11N power cable did a nice job of taking the edge off without running the others too bad. How about a PS audio Power Plant 300? Just saw one used here with the multiwave for under $900.

Why is everybody so quick to spend this guy's money? Before purchasing anything you need to carefully setup your system. Pay particular attention to your speakers. Play around with toe-in and speaker height. Also be sure to always leave your equipment on, it tends to smooth out the sound. In the long run, you'll be better served by acquiring equipment that is neutral sounding rather than trying to "voice" various components. One last point, while I'm not familiar with Sistrum, a good equipment rack and speaker stands are essential for a quality system.

Oh yeah. How is your room treated? DO you have a lot of reflective walls and surfaces exposed? Before you buy anything please address your rooms surfaces and other related issues. If your room sucks don't even waste your money on any heavy duty purchases and infact, you may as well stay with the NAK!!

Speaking as a fellow newbie, actually took a twenty year break to raise kids. I have assembled a second hand system in the past 8 weeks and experienced the same problems you are having. My system is Aragon 24K, 4004; NAD 540C CD, Magnepan MGIII speakers, Audioquest Crystal Speaker Cable, MAD Pearl IC Pre Amp to Amp and Green XLC from CD to Preamp. My listening room is in the basement with concrete floors (covered with carpet) and drywall. I covered the rear wall with relatively heavy indoor-outdoor carpet ( I just used seam tape and finishing strips-$100.00). This helped some but the edginess was still there. Next I replaced my speaker cable, Audioquest Crystals with Kimber Monocle ($275.00 used). The detail improved but the edgy brightness was still there. Currently I haveTMC Yellow interconnects pre amp-amp and TMC White CD-Pre amp. The brightness is gone but I also have lost some of the "excitement". The MAD IC's are silver coated ribbons while the TMC are all copper. I am looking for some copper/silver hybrid IC's to see if there is a way to achieve a compromise, maybe something like Kimber Silver Streaks. Hope this helps. I think audio is always going to be a work in progress. If it weren't for the money, this would be the fun of the hobbie. We can still think about Balanced, bi wire and tri wire, tubes and soon, SACD.

I recommend you to take a good look at your system set up ( give the Bryston enough break in time as well) as Onhwy61 suggest. You don't mention your previous amplifier, couldn´t it be that you are noticing the difference between the two (you are used to the previous sound)?
Whithin certain limits you might be able to modify the presentation out of your source playing with shelf materials and footers. What is your metal rack shelves material ? What is the floor/ rack interface cones, soft? Try some soft ones like vibrapods under your CD player they do make a difference. Do you have power conditioning?
If you provide more info, maybe a fix can be found....