A minor rant


Prologue: this is a minor rant. It will not be tediously long, and it will not attack anyone. Proceed only if interested in reading a short diatribe on reviews about tweaks.

Almost all serious members of our hobby have tried various tweaks over the years – some successful, some not. Infact, tweaks are so much a part of our hobby that dedicated audio enthusiasts are often referred to as “tweaks”. I’ve tried a lot of tweaks myself over the years, and most proved of dubious value, but most were also fairly cheap. Many of us indulge in tweaks in the hope they will get us closer to audio nirvana. I think, however, that the variety and price of tweaks has reached the stage (like interconnects) that, as Monty Python might say, they are “silly” (envision John Cleese doing his bit as the Minister of Silly Walks…).

During lunch today, I strolled down to the Tower Records in the University District (a block or so from the Univ of Washington campus) to browse for a few CD’s, and wound up buying the current issues of “Listener” mag and “Audio Musings” mag. The copy of “Listener” contains a subscription ad with a picture of a coiled pile of feces sitting next to a can of Shinola wax, with the caption: "Read ‘Listener’, and learn the difference”. Did this ad inadvertently contain an editorial statement about the very tweaks that were the subject of their review article?

There are two tweak products reviewed in the mags: the Rollerblock Symposiums (which sell for $300 for a set of 3 steel balls, with their blocks – and for only $75 more, with tungsten carbide balls) (I once knew an Army drill sergeant with a pair of those, but that’s another story…), and the Aurios “Media Isolation Bearings” (MIB’s), which sell for the same price.

“Audio Musings” has an equipment review of the Aurios bearings, which the reviewer tested under a Parasound 1500 power amp (also the subject of a full review). To determine how effective the isolation bearings are, the reviewer placed not one set, nor two sets, not even three sets under the amp. He eventually placed 5 SETS OF BEARINGS (3 bearings per set) under the amp. That’s $1500 worth of isolation bearings under a $995 power amp!! Here’s a quote from the Audio Musings review:

“I switched amps to the Parasound 1500. After getting used to its sound, I placed three Aurios under it. With just the three Aurios MIB’s, there was a slight but noticeable improvement. With each addition, the level of improvement was noticeable. Then I put 6, 9, 12, and then 15 MIB’s under the amp. With each addition the level of improvement was noticeable. Boy, was I surprised. This raised the level of performance to quite a degree…”

Let’s set aside the issue of whether the reviewer suffered from “audio delusions” working as a possible factor here. Does anyone in their right mind actually spend 50% more than the cost of the amp (or other component) on isolation tweaks? What kind of improvement would be realized by getting a $2500 amp with regular feet, vs. a $1000 amp with $1500 feet? At what point does improvement from adding more MIB’s reach a plateau? Could an actual human being hear the difference between 15 MIB’s vs. 30? Or 45, etc. If these isolation bearings offer such "noticeable improvements", why has no component manufacturer seen fit to make them standard on their products at a fraction of the $300 cost (for one set)? (Would you buy a $20,000 car with $30,000 tires?)

This kind of asinine reviewing is what contributes to “normal” people seeing audiophiles as strange at best, and maybe clowns or dupes at worst. This review really aggravated me, and I appreciate having a place to vent to my fellow ‘philes. Thank you – I now return control of your computer to you.
sdcampbell
Sdcampbell as usual, you are 100% correct. A $2500 amp is ALWAYS smarter than a $1000 amp with $1500 feet. The most astonishing thing is how many in this hobby actually end up with the latter. No matter what those feet are made out of, they can never take the place of superior power supply, passive parts, wiring, circuits, output devices, build, and even connectors. Perhaps people get overly attached to their equipment. They think that by doing much of this gimmickry, they can turn that $1000 amp into something better than the $2500 amp. Wrong. While it is nice to improve something, you can not turn a Jolida into an AirTight. At least, not with the kind of tweaks that most people get into. We see it all the time though. It usually starts with the, "This $1500 Brand X amp sounds as good as anything under $5K" statement. Oh yeah? While it may be a good(even great) value, that is normally not seeing things as they really are.
Some great, funny posts. Or should that be riposts. I've even gotten a couple of private E-mails from members who are equally turned off by some of the irrational reviews of products. Anyway, thanks for letting me vent -- and you're probably right, David99: it wasn't a minor rant, but I sure feel better.
Wow, i'm going to go get some balls right away. Them ones with tongue stan car bide should work real good under my Bose amplifier and make it sound like a live show. Huuweee, I could even charge folks for listening !!! Round these parts steel balls would get kinda rusty I reckon, but then the misses says them there balls must be rusty by now anyway. Say, where do youall get that Listener book cause I reckon they must know more about balls than anybody else.
SD of course you are correct about the absurdity of using
$1500 of bearings under $1000 amp, it may even be silly to use $300 (1 set) under $1000 amp because of high relative cost ratio. One set of standard MIBs can support 1000lbs, and I doubt if any major benefit comes from using more than 3 MIBs from my experience with these.

I like the cover of Listner tweak issue, with medeval doctor
boring hole in some fools head and inserting a funnel, could this be symbolic of the average audio mag reviewer?

BTW I do believe bearing devices are quite effective for certain applications, but only if it makes sense cost wise with a balanced system.