wilson watt puppy 7 help and suggestions

Khrys: I agree but forgot to mention that I owned Lamms (M2.1 and M1.1's)before I switched to Theta Citadel and the solid state port sounded better. Your time will be better spent adjusting (adding and removing spacers on the Wilson footers will change the bass based on the room inteactions) Remember to change out to the correct Back spike on the Watt since you adjusting the height of the speaker. Of course always put the speaker in the Zone of Neutrality using the WASP positioning method first.

Changing the back spike on the Watt plays a huge role in the mid bass sound. Refer to you wilson manual for both of these adjustments.

Karmapolice: it's been awhile since I changed the shorting plug but thanks for the correction.

I have high ceiling (although I have treated them) and wood floors (albeit a few rugs) and so the room is real lively. I am using two spacers.

I would be curious now that I have treated walls and thrown down some rugs whether maybe one spacer would suffice and hey no even sure I have correct back spike.

I would love to play around with these things but want to find someone local here who might give me a hand in that endeavor. I am open to bribing someone local and am looking for victim/volunteers in a posting I placed at audiogon and audio asylum.

I would hate to pay a professional to do that because they would charge probably $500 to come over for a few hours and who knows if they even really know the watt puppy 7 process.

nominal impedance means average impedance and can often be misleading because it can dip below the nominal rating...

i just went through the setup process all by my lonesome, w/ WP6s in a 15*11*8 room (speakers on 11' wall).

take a look at audioasylum faq, as you'll see speaker setup methods by Wilson (WASP), Audio Physics, Cardas, and Rives.

IME, rives is the best approach. the most important factor is to get the distance from the front wall to the speaker correct. then play w/ sidewall distance, and finally toe-in. takes 1 day of very careful listening, but the results were head & shoulders above what i had earlier (via WASP).

also, spikes / spacers do 2 things:
1) change height of tweeter / mid alignment w/ ear
2) decouple bass from floor (cleaner bass, but less of it)

#2 is accomplished w/ any elevation, and #1 is ameliorated w/ correct WATT spike. leave the WATT spike for the very end.

(none of the spike / spacer variables should factor into the speakers' location however)

good luck.
rhyno

I might be a bit daft but where would I find out if using the right back spike? I know that when I originally installed the wilson the guy put in one spacer. I then had him come back and add a second spacer. The guy was sort of impatient and am pretty sure he did not adjust the back spike after adding the spacer.

It appears just at looking at the spike at the back and the speaker equipment kit that I currently have in the shorter of the two spikes. Does this mean necessarily that the longer spike would be preferable? I hate to play around with this on my own. Is it easy to adjust by yourself never having done it before? The dealer will be of no help because I got a great deal on a 3 month old pair of puppy 7's because this other customer wanted to upgrade to the maxx's and so he sold me his puppy 7's through the audiogon and got the la dealer he bought the maxx's from to throw in the delivery and installation of my speakers for a flat fee. They did it but were less than thrilled not to get the sale of a new puppy 7 from me since I had bought the sophias from them. In any case, they were not that much help with the installation of the sophias and do not consider them very audiophile savvy and are a curious choice for a wilson dealer.