Atma-Sphere amps with Eggleston Andra II's

The OTL's, as correctly stated, are intended to use with high impedance, especially electrostatics (like Soundlab), speakers. The Dynaudio drivers need current and amps with a good damping factor in order to get the best results. Actually it is strange that your match with the C2's is still good...
Anyway, if you want to keep the AS, why not bringing your amps to the nearest Eggleston dealer and listen for yourself ?
Just a thought by an Eggleston lover.

Don't sell your amps - they are far too good! Think of other speakers - Kharma 3.2 come to mind - that's what I use with AS 2.2s and the sound is remarkable

As an MA-2 owner, I've been quietly reading this thread because I've never heard the MA-2s with the Andra IIs and they may well not be a good match with this particular speaker. However, unlike typical OTL amps, the MA-2s are designed with a low impedance output and are incredibly versatile in the speakers loads they will drive exceptionally well, and with tremendous bass authority.

For example, they have proven to be a great match with Avalon Eidolons (4 ohm nominal load, 3.6 ohm minimum) and with the Magnegpan 3.6 (which will challenge many amps).

I'm not trying to suggest they would be a good match to the Andras, but some very broad statements have been made here that might lead some to think that the Atma-Sphere MA-2s would not be a good match with lower impedance speakers across the board, and this is demonstrably not the case.
.

I'm of two minds on this discussion. On the one hand, I had Andras which have been converted to Andra II's, and there is no question that the original Andras couldn't be driven by less than 300-350 watts per side. When I spoke to Eggleston, they reminded me that the A IIs were rated at 200 watts MAXIMUM, and told me any good 100 watt solid state amp would probably be fine although they could handle much more, and specifically recommended McIntosh amps as a great match. By the time the A II's came back from the factory, I had a demo pair of Mac 501s waiting, and the combination has been extraordinary, especially when I added a pair of Purist Dominus speaker cables. Having said that, and having 500 watts available per channel, the fact is the Macs have meters, those meters reflect that the amps never put out more than 125-150 watts on the loudest passages of the largest classical synphonies, and that in my 23 x 13.5 x 9 living room, it would be unbearably loud to open the system up further--and I regularly listen from the eighth row of Carnegie Hall, so I know what an orchestra sounds like going full out. Without getting into the need for reserve output capacity on an amp, I don't believe the Macs have ever put out 200 watts with the AIIs, and I wouldn't rule out your present amps just because they are rated at that level. As to your particular amps, I don't know them well enough. I'd certainly listen before ruling them, or the A IIs, out.

Lot of responses but... hey Bill ! Are you still here ? What did you decide to do ? Let us know, I believe we are all curious...