Bloated speakers/weight wise

At the very moderate listening volume I hear my music, it would make very little difference if the cabinet were 1/2 inch or this 3/4 fab wood. I guess if I had the bigger 8 inch, or 10 inch Seas, then maybe a mid SPL there would be at least some advanatge. If I A/B at low low/mid volume, its doubtful anyone here could definetly say this is 1/2, this is the 3/4 unless by lucky guess. Feel free to disagree. I think some labs make big and/or heavy speakers just to try to impress and feel like you are getting your moneys worth.
Since we are on the subject of over fatty speakers, sorry if some are insulted, is the lab that loads in more than 3 drivers per cabinet. Like some sort of 4 , 5, EVEN 6way!! :-0. I recall going to the New Orleans audio meeting at a local audio shop, there they were, the big funky Legacy Towers. Took me back to the early 70's. Man, what a speaker, what a 'sound". Price was at some odd thousands of $'s. duh

Did I just see Ecruz mention a speaker at 1/2 ton. Well of course its not home model

Actually they are home speakers, Magico Reference. I saw, and heard them in an A'gon member AudioEzra's listening room.

I guess I look at going from 1/2" to 1" or 3/4" to 1 1/2" MDF a little differently than simply saying it's adding mass. Yes, of course it is adding mass. But more to the point, I think, is that it's changing the ratio of dimensions by doubling the front to back wall thickness (plus it also often entails combining two layers with a an adhesive in between, a form of constrained-layer damping). This is primarily where the extra rigidity comes from. (Think of an I-beam -- it can nearly as rigid as the same dimensions of a solid bar, but is obviously much less massive, which can actually make for a stronger structure for practical purposes.)

And achieving higher rigidity itself is also not always the same thing as reducing resonance. Very non-rigid objects can be the most non-resonant objects -- think of a down pillow -- depending on their form and density. Increasing rigidity raises the resonant frequency (again, all other things being equal, which they likely won't be). Of course higher rigidity in a speaker cabinet is a good thing from a wavelaunch perspective. But without proper attention paid to shapes, sizes, damping, points of contact, etc., higher rigidity in itself might not reduce resonance but only change its character. Overall, to my mind both higher mass and rigidity are probably somewhat overrated compared with self-damping as means to achieve the design goal of a quieter cabinet, and probably more expensive as well, but for the fact that most manufacturers are already set up to deal primarily with MDF.

I thought the Sterophile measurements of the new Mordaunt-Short Performance 6 speaker, that's made of a combination of molded structural foam of varying shapes, thicknesses and densities plus reinforcing metal elements, was fascinating. The result (achieved at the initial cost of a reported 10,000 hours of design time and who what tooling costs) is a 48" tall, 18" deep at the base speaker weighing only 66 lbs., and yielding some very impressive accelerometer results in JA's cabinet resonance tests, with low amplitudes, no dominant frequencies and extremely short die-away. They cost $6,500, not really an outrageous price for an imported, high-tech, nearly full-range 4-driver floorstanding flagship, and the molded-contoured form probably means it has better diffraction properties than most MDF boxes to boot. Of course all that doesn't necessarily mean they sound great, but I do want to hear them if I can.

Vmps RM 40's at 260lbs each. They are not too heavy. I'm not even sure what too heavy for a speaker is. I'd rather have a heavy speaker as they tend to be able to reproduce more life like realism. A smaller speaker usually won't handle as much power or throw as large a soundstage.

I have nothing against a small speaker and if someone never pushes it too hard then it's fine. If you like significant volume and at an at ease sound at these volumes then a larger heavier speaker may be what you need. It's all in your perspective.

I only weight 160 but if there were a flood I'd get those things up the stairs! Moving them around the room is actually very easy on my carpet.