Acapella vs. Avantgarde

I demoed my AVG's with a BAT VK75se at my dealer. I thought the sound was pretty bad; my dealer had the speakers set-up well (he is very knowledgable about AVG's and has a lot of experience with the brand), but the sound was rolled off and disjointed. Through it all I could hear something that I liked.....

In the end he offered to let me audition them at home and I was able to borrow a pair of Nagra VPA 845's from him. The sound clicked into place with these amps and I bought 'em. The Nagra's were not the best match either (they were too noisy) but they did let me hear what the speakers are capable of. I have tried about five different amps with my speakers since and can tell you they are VERY revealing of what's driving them.

FWIW, I finally settled on an Art Audio PX-25 and am very happy.

Chris

Well, the trick, as you know, is working the pieces together to make for a coherent whole that is, if not greater than the sum of its parts, than at least not limited by any one of them.
Thanks for reporting back, and let us know what your experience is with the amps. I went from Audiopax 88s (@ 30 watts per) to the Lamm ML2 (@ 18 watts per) and found a significant improvement; granted, there is also a big price difference, but not so much when the equipment is bought 2d hand.
Enjoy your speakers. I'll bet they wind up improving as they break in and you learn more about how they should be set up in in your room.

Eljaro, your comment was very astute. You are quite right that the two Avantgarde systems were not set up properly. When I heard the Uno's, the room acoustics was not very good, and the dealer had not found an ideal setup for the subwoofer modules. In fact, when I started listening to the speakers, one of the subs wasn't even turned on. It was only when I complained about the lack of bass that the omission was discovered.

The Uno dealer did have the speakers set up properly, but probably did not hook up amps that would do them justice. No option of bringing my own amps since I had to fly to a different city to hear them.

Dan-ed, the Acapella's were demonstrated with a 55W SET because I specifically requested for an amp similar to mine. Once again, no option of bringing my own amp as the speakers were in Sydney. But it did demonstrate to me that I am unlikely to achieve ideal sound with my current amplification - so I did achieve one of my objectives. At the moment i'm doing a bit of amplifier research. I found an old thread on Audiogon discussing suitable amps for the Violons. When I get my speakers and do some listening, I will decide for sure whether or not I need an amplifier upgrade. Then you will see another post from me on Audiogon :)

The Violons are bi-wirable, although the dealer recommended that I do not do so. He found better results running a single cable to the woofer module, then another length of cable to the midrange horn, and from there to the tweeter module.

Whart - no break in is necessary since these speakers are secondhand and a few years old. I will be able to enjoy them the moment I get them! Unfortunately that won't be for another month ... at the moment I am mobilizing some money and the dealer has to arrange to ship them interstate.

I would like to thank you (and others) for the invaluable help I have received here. And thank you also to everyone who has emailed me ... I now have some new friends from all over the world. The next time you are in sunny Melbourne, make sure you drop me a line.

I'm sure you're going to love the Violons. I did some experimenting with mine over the last couple of weeks and contrary to what most people tend to think, these speakers responded very well to bi-amping with quite different amplifiers.

I already found the perfect amp to drive the midrange horn and the tweeter: Jadis SE-300B monoblocks. These single ended amps put out only 10 wpc but it's seems like it's plenty of juice for this application. I preferred the Jadis to the mighty Lamm ML 2's and several different push pull amps I tried. The Violons sound spectacular now with all the magic you would expect from well implemented 300B single ended circuit.

I am still playing with different solid state amps for the woofers, but so far I love the combination of the Jadis monos with Belles 350A Reference. The blend is almost seemless.

The Violons need a very careful setup to sound good in the bass, but once everything is right, the bass is quick and quite extended. From my experience the stock footers should be replaced with something more adequate. I had a set of the largest Sistrum Audio Points custom made to fit Acapella threads and the improvements they brought in were very dramatic: tighter, quicker bass and better focus and microdynamics. $400, but well worth it.

If you're willing to make some changes to your electronics, the Supratek Cabernet Dual is a fabulous preamp and will make bi-amping much easier to implement. It has basically two preamp circuits in one chassis (one based on 6H30 tube and the other based on 6SN7 and 101D DHT), with independent gain control and one master volume. This way your will be able to perfectly match the levels if your amps have different input sensitivity. The Supratek pre is truly amazing and it happens to be made not far from your home!

Kotjac, I know the Supratek guy. In fact I knew him when I was back in uni and when he was first starting up his company. I interviewed him and published his comments on another forum.

Yes, a Cabernet Dual is certainly on the cards. Will have to see.

Interview is here if you are interested:

http://www.stereo.net.au/forum/index.php?showtopic=2550