Anything as " fast" as SPECTRAL gear?


(My 90's vintage still sounds good with very good (no -exceptional) isolation and conditioning. (Sound Application, Equitech & MIT). SPECTRAL claims faster today. OK. Mid 90's hot cars went 205-210, todays 210-220. Does it make any difference to the music?
ptss
Al, do you think what you describe might correlate to an amps ability to deliver "holographic imaging" as part of those more nebulous sonic artifacts? I tend to relate high performance as measured in things like bandwidth slew rate and rise time with resolution and resolution is a factor for holography I believe.
So Al, what does that mean in the context of ARC ref amps. As I mentioned above, the slew rate for my amp (150 wpc) is a paltry 13 volts/microsecond and the rise time is a sluggish 2 microseconds. The top of the line Ref 750 has a slew rate of 20 volts/microsecond and a rise time of 1.5 microseconds.

Based on your comments, I gather a CD will be over before the amp is able to get a signal to the speakers. Almost like playing a 45 rpm record at 33 rpm on a turntable. :)

Of course, I'm being tongue in cheek, but I gather there is some overkill in the specs. Kinda like an amp with a DF of 1000 ... way overkill. Ralph has mentioned that a DF over 20 is a waste.

Please clarify.

Bruce
Bruce (Bifwynne), a basic point in my analysis was to show that even relative to VERY conservatively drawn thresholds the speed-related parameters of the Spectral amps are **in themselves** extreme overkill. While at the same time citing the possibility that the overkill might provide indirect benefits in the design.

The numbers you cited for your ARC amp don't seem to me to be unreasonable in any way, they just represent a different philosophy and a different approach, which result in less margin (but arguably still very reasonable margin) in those particular parameters.

Mapman, re your question, I'm not really sure. I too believe that there is a strong relation between resolution and holography/dimensionality etc., but my instinct is that linearity, distortion, and noise performance more often than not tend to affect resolution more significantly than the speed-related parameters. Just MHO.

Best regards,
-- Al