Polish for adagios?

Or McGuires Quick Detailer Mist and Wipe. I bet they all come out of the same chemical factory ;-)

Thankyou guys..i appreciate the input on a simple forum.You guys i can rely on honest input...cool,thats what i have understood,The auto stuff works....found a glass cleaner..nonamonia.Sprayway glass cleaner works a miracle getting the junk off speaker cabinetry....?

Woodworking is another hobby of mine, and I'd suggest you simply use a quality furniture grade paste wax. I've found that Mylands paste wax is easy to work with as long as you follow basic paste waxing guidelines, which are... use a soft cloth... apply a very thin coating... let it dry for a few minites... and wipe it off with another soft cloth. Old T-shirts are good becasue they won't scratch the surface. Never use anything with an abrasive because it'll scratch the surface. Put two or three coats on (wiping down each coat before you apply the next coat) and leave it alone. You really don't need to constantly wax these. I have the Adagios so I know how they're finished. Since they have several coats of clear finish on them, you're not "treating the wood", you're simply polishing the clear coat finish.

Paste wax may help you remove the streaks which the Gibson polish has left behind. Put a little paste wax on an small area with a streak and see if it takes it off before you go further.

Hope this helps you out.

Email AZ and ask them what they recommend. I'm sure they have a particular product that they use for final polishing before they leave the factory. I know that a couple of high end guitar makers use a product Novus No. 1 for their final polish and would probably work well. Frankly, unless there is a particular residue you need to remove, I believe I would just use a soft cotten cloth slightly dampened with water. Be careful with auto cleaners, as many are slightly abrasive.

For piano gloss finishes I have tried the detailer sprays from Mothers and Mcguires . The best results though I have had for streak free clean shine is Pledge multi surface cleaner . The trick is , don,t spray it on the surface of the speaker . Use a good clean micro fibre cloth for polishing autos , spray it on the cloth . Keeps the NHT 2.9s I have always looking new . Cheers