Merlin room positions

All our rooms are different,Size,furnishings etc.So its not a question we can give you an answer that will work for you.You should probably start moving them around in 3-4" increments and report back your findings and we can go from there.Like 18" from back wall,24" from sides,7' apart.Stuff like that.If your bass shy maybe start 36" from back wall and start going back in to wall to re-inforce......How about taking a picture so we can see whats there?Maybe pray to the audio gods for a little enlightenment?Sometimes it works...I can hear you laughing now....good luck,Bob

At app. 2' from the front wall of the room I started the bass reinforcement/imaging trade-off. My old room was large and the VSMs were SEs so I settled on 2' for max bass with decent imaging. Subsequent rooms were somewhat smaller (current is app 14' X 19') and the speaker/BAM have been upgraded to produce significantly more bass. I'm now at app 4' from the wall - imaging is much improved (about as good as any speaker I've heard) and bass response is full, powerful, and very nicely balanced.

Good Luck,

Marty

Begin by following the Cardas recommendations for speaker placement. Can't remember the details, but you should be able to download these from their website. This should get you close and you can then make the adjustments for best sound.

mw,
if the wall behind them is draped or damped in some way they can go closer to it than if it is not damped. because of the way the speaker is designed with its power response, it is also better to make sure you listen at 9.5 feet or more away and this may end up being more important than the distance to the wall behind them. also the distance apart depends a lot on how narrow the room is. a good starting point is 6" tweeter to tweeter but this works best in rooms of around 14 feet wide. do not beconcerned with the distance apart being 5.5 to 5.9 feet as their axial response is superb making them sound wide even if they are closer together.
if you need more specific help you can call me at the factory.
regards,
bobby