Focal 1037be's Amp Suggestions ???


I have Focal 1037be's and I'm pushing them with a BAT VK300x Integrated. My listening room is 24x26 with 10' ceilings. I believe I'm under powered with the Integrated. I'm looking for suggestions as to what amplification works for others with the 1037's. I would consider seperates as well. I guess budget $$$ would be 5-6k plus what I can get for the VK300x. Thank you in advance for your input.
zenieth

Your amp should be fine. What are you looking for or missing (bass?). I have found this speaker to be a little picky (in the bass) about placement. How far are they from the rear/side walls?

I have heard these several different times, two different rooms. Once was with 90 watts a channel Arcam mono blocks. It was plenty of power, the room was 15X22X9 and I sat about 10 feet back. They were close the rear wall in this room (about two feet). They had plenty of bass but it was a little muddier than the other room.

In the other room (about 14X20X8 I sat 8 feet back) I heard them on Arcam mono blocks and some way out of my price range Krell amp. The 1037s were pulled way out into the room (5+feet). Because of this they had NO bass. The Krell was more refined than the Arcam but I did not feel that it came from more power.
My guess is that it's not the amp, but the large room -- you have a lot of cubic feet and most speakers can't really fill such a space.
James63, They were sitting about a foot from the rear wall. There isn't any sidewall. I moved them further apart and out a bit more. Well, maxed as much as my cables will allow. Actually, it sounds better. Maybe I should get longer cables. I still have three or four feet more that I can utilize. They were about six feet apart and now they're about nine. I also towed them in a bit more. Raquel, your point sounds like the problem. Maybe I should move everything downstairs to the den which is 15'x15' with 8' ceilings.