Magnepan Placement


I have just picked up a pair of used SMG's and have to say, even thought they may not be the most recent version or the top o the heap, these things are amazing! Which leads me to my question, are there any "do's and don't" regarding placement? I have read Jim Smith's "Get Better Sound" and have applied his rules of thumb regarding placement from the rear wall, etc; however, I wanted to see if there are any secrets out there? Thanks in advance!!
jimbojrjb
Tweeter or hf part of drivers to the outside, generally.
Bare minimum of 30 inches from back wall. 48" is more like it. Keep 'em out of corners.
They need 'air'.

Always have some toe in. Experiment. You can face them right at the seating position of 'cross' them in front or behind you.

Adjust for image and staging.

If used in stereo only, IE, no TV in between as I have, you may want to put some diffusion between the panels on the wall...
I have seen backwave modifiers for Maggies, as well, since some people think that the back reflection causes audible problems. I may experiment with that, using a 2x or 3x bath towel draped over the back of the speaker, on the tweeter side.

The folks over at Cardas use a mathmatical theory for setup which works. At least it has for the last 5000 years.

http://www.cardas.com/pdf/roomsetup.pdf

They may have a special procedure for bi/di poles.

Experiment to your hearts content. Send wife/kids to movies for a couple hours so you can have some peace and quiet to experiment.
Agree with all the above, including experimenting with tweeter in/tweeter out, air to the sides and back, and the need for toe in. Adding power will be the single best upgrade you can do. Also,consider stands that will couple the speaker to the floor for much improved bass. Other worthwhile tweaks include Cardas jumpers, and Hi-Fi Tuning fuses. Have fun!
Thanks guys! These are all great tips that I will play around with and enjoy. The cardas website is pretty cool too!
go to parts express, grab every size 10w .39 cent resistor from .22 to 3.0 ohms(under $15 shipped). After you find your favorite, buy a pair of mills resistors in that size from parts connexxion in Canda for $14 shipped. The Mills are magic, and bring back the magic the cheap resistors loose.

Emotiva XPA-5 and XPA-2 sound fantastic with the MMG,12's, and 1.6's. There incredibly priced and are top knotch, despite some who say you need to spend more(I sold my $6k Bryston bsst and dont feel Im loosing a thing.

I have mine about 40"from the wall. Slight toe in. Im used to planars so I like my front image wide like only a Maggie and Logan seam to be able to do. So toe in is aprox 10 degrees.

I highly recommend a nice sub. I placed mine in the center and the sound is as if its coming from both pair, and phase seams perfect.