2. amps-preamps
  3. 1432666396

Pre-amp causing loud hiss from speakers

I have a BAT VK3i with Quicksilver Horn mono-blocks and Klipsch LaScala's. This setup is dead quiet, however when I recently hooked up Rogue Audio M-180 mono-blocks there was a loud hiss coming from the speakers well past the listening spot. This noise was constant even with the volume down to zero and occurred with either balanced or rca connectors.

When I took the BAT out of the equation there was now only a faint hiss coming from speakers but one had to put your ear to it to hear it. After disconnecting all components from the BAT and putting it back in - the noise returns. I tried a Conrad Johnson Classic and there was no noise.

So does anyone have any ideas as to why the BAK and Rogue Audios amps do not play nice together?

Thanks
deadlift
czarivey
5,946 posts
 
can't you just proceed with unhappy return after half-hour of listening?
zd542
5,339 posts
 
"05-27-15: Deadlift
I will experiment more with the IC's and binding posts,"

Just list your IC's. Someone here will know if they are balanced or not.

"05-27-15: Czarivey
can't you just proceed with unhappy return after half-hour of listening?"

I agree. Any good dealer will try to do something for you.
deadlift OP
18 posts
 
The interconnects are from Transparent Audio probably about 10 years old. I really want to try to make this work before heading back to the dealer.
stringreen's avatar
stringreen
6,513 posts
 
There is a benefit from getting all one's components from the same manufacturer....they play together well.
zd542
5,339 posts
 
Well, I guess your run of the mill, 10 year old Transparent cables are probably internally balanced. Try new amps first and if they don't work out, you can always revisit the cable issue.
More to discover