Polarity mystery: Can you help me solve it?


THE BACKGROUND: My speakers are Focal 1007be. They have a Linkwitz-Riley crossover with a 36 dB per octave slope. Because of that, the two drivers are wired with opposite polarity: the woofers are positive, the tweeters are negative.

WHAT I DID: At the advice of a friend with the same speakers, I inverted the polarity of the drivers, by simply reversing the red and black speaker wire leads to the terminals of both speakers, so that the speakers are still in phase with each other, but now the woofers are negative polarity and the tweeters are positive polarity.

WHAT HAPPENED: To my surprise, the sound improved! Specifically, image focus improved. The improvement can't be attributed to the preservation of the absolute phase of the recording, since the improvement was the same for many different recordings (some of which, presumably, preserve absolute phase, while others do not). And the improvement can't be attributed to the speakers being wired incorrectly at the factory, since the friend who suggested that I try this experiment owns the same speakers and experienced the exact same result. So I don't know what to attribute the improvement to.

Can anyone help with this mystery?
bryoncunningham
IIUC you reversed the spkr cable connections, right?
If the sound is really better, it is probably your room acoustics favouring 180 degrees change in phase.

Do you have the impression of a deeper soundstage now?
phase inversion is a strange phenomenon.
My preamp has an invert function which I some times experiment with if the music sounds lame. Sometimes a substantial improvement, sometimes barely any difference, sometimes a degradation occurs. Sometimes even different cuts on the same record / CD prefer different phase.

Sorry Byron I can't explain this although I can certainly validate your findings. Trouble with hardwired phase inversion is it's not adaptable. I guess go with whatever sounds best the majority of the time. Interesting post --- thanks.
There was a very interesting article published years ago about absolute/relative phase. "The Wood Effect" by Clark Johnson.
I believe that all you did was change the sound for those disks recorded in one polarity (e.g., inverted, non-inverted). So while those disks may sound better, the ones recorded in the opposite polarity should sound worse. However, since the speaker drivers are apparently not polarity-coherent to begin with, I'm surprised you could hear any difference.