2. tech-talk
  3. 1439749162

Audiophile Fuses

I have used audiophile fuses for years in various equipment without problem, generally appreciative of sound quality improvement. Recently, I've encountered problems with audiophile fuses blowing in my Coincident Turbo 845SE amplifier. At this point I've had two failures of Synergistic Red Quantum 6.3a 250v sloblo fuses in this amp.

Recently I discovered some interesting information in regard to audiophile fuses at partsconnexion.com website. In the heading above stocked fuses it states, "blow characteristics will differ slightly (due to the different metalurgy of the fuse elements) between commercial grade and audio grade fuses. We can't guarantee that your audiophile grade fuse won't blowout at different in-rush current thresholds than your stock commercial fuse."

They also mention one should check for continuity on fuse prior to installation to insure it will be covered by warranty.

And so, based on my experience, and quoting this message, it seems buyer beware on these fuses. First off, I doubt measuring continuity prior to installation will validate any warranty. How would dealer/manufacturer know whether or not you had installed a blown/defective fuse? Also, it would appear this request to check continuity prior to installation may demonstrate quality control problems as well. Do they not check continuity at the manufacturer and/or dealer? Or are they often damaged in shipment? If so, that is a high level of fragility.

At this point, I would advise caution in using audiophile fuses in high current amplifiers. The disclaimers stated on partsconnexion website demonstrate they've encountered this problem more than a few times. I applaud partsconnexion for they're forthrightness on this issue. Other manufactures/dealers should follow suit.
sns
charles1dad's avatar
charles1dad
10,250 posts
 
Sns,
Nice situation you have by owning two well regarded 845 amplifiers. I replaced the stock Solens input coupling cap in my Frankenstein with the Jupiter copper foil. It is a worthwhile improvement but not a "night/day" difference. Cost effective it certainly is. Given my success with the Synergistic Research Quantum fuses I may try their Red fuses one day.
Charles,
zd542
5,339 posts
 
"08-18-15: Yogiboy
Zd542, Have you ever done a blind listening test with your fuses? Just like the difference with gold and silver plated spades on speaker cable,. I think you will come to the conclusion that it is all just Smoke and Mirrors! But like I said,if you hear an improvement that's great!"

You completely missed my point. You're referencing things like placebo and blind testing. That's fine, but in order for those terms to have meaning, they need to be used properly. And the only way that happens is if you conduct a test and get some type of results. You haven't done that. You're guessing. You assume the placebo effect is in play here, and you're guessing what the outcome of a double blind test will be. You also seem to be getting frustrated with me because I'm not taking your guesses at face value. For that, I make no apologies.

"08-18-15: Yogiboy
Zd542, Have you ever done a blind listening test with your fuses? Just like the difference with gold and silver plated spades on speaker cable,."

You haven't done so either. And remember, these are your claims, not mine.

If you like, conduct whatever test you feel appropriate to compare the sound differences between fuses, and post the results, along with your testing method. Then I'll go buy the same fuses and try the same test myself.
yogiboy's avatar
yogiboy
5,907 posts
 
Zd542, Why do you think I'm getting frustrated with you? The only test is in the listening. How do you know that I have not done listening with different brand fuses? A fuse at the same rated value will measure the same. I just do not understand what the problem is ? Have you used fuses and found a difference?
zd542
5,339 posts
 
I can't figure out what you are talking about. You keep changing.

"The only test is in the listening."

You said that if you hear a difference its just the placebo effect.

"How do you know that I have not done listening with different brand fuses?"

I don't.

"A fuse at the same rated value will measure the same."

What are we measuring? This is a new topic.

"I just do not understand what the problem is ? Have you used fuses and found a difference?"

Well, as long as I have the same opinion as you, there is no problem. You won't allow for anything else.
andrew9405
225 posts
 
Audiophile fuses.
David Hannum said it best.
More to discover