Vintage DD turntables. Are we living dangerously?

It's been a couple of months and nothing stands still so I wanted to note that I replaced the feet under my naked (to a point) TT-101 with Mapleshade Heavyfeet (I use 4, three supporting the edges of the tin-can bottom and one in the center of the can to damp it.

I was using smaller brass points and sorbothane and brass cups. The new feet go right into the mdf shelf of my Solidsteel wall shelf. Much better vibration control, almost no noise from a tap test to the mdf shelf. Results in a nice increase in transparency of sound-image.

On a totally different track: the forthcoming Technics DD turntables with advanced motors may be just the ticket for a worried owner of golden-age technology like me. I am hoping that there will be a better SP 10 unit in store. Does anyone have the inside scoop?

Possible "scoop" on the new Technics: From the drawings, it appears to have a coreless motor, a la my lovely L07D and the cantankerous TT101. That would be great. Furthermore, the magnets appear to be attached to the underside of the platter at its outermost perimeter, with the coils in fixed position beneath them, which would tend to benefit torque. One can only hope the thing will not cost $50,000.

Forgot to ask: I have reached the end of my rope with the TT101. In my efforts to fix it, I have achieved one thing; the fault is now constant, not intermittent. The good news is that this may make it easier for a really good tech to diagnose the problem, which I think is related to malfunction of one of the two opposing servo mechanisms. So, the question is, has anyone identified a tech who is well versed in these particular issues?

the fault is now constant, not intermittent

This is good news Lewm. At least a Tech can now 'trouble-shoot' it for you.
Can you describe the exact symptoms....?

hi Lewm,

You could try talking to the guy, Dave Brown, who fixed my tt 101. He wasn't taking new clients last I checked about 6 months ago, but he might be more open now. He's already famillar with the table and has perused the manual, so that saves a lot of time. You can find his contact info here. Good luck.