Looking for really fine cables at really low price

I see the WE wire is available right up to 10ga.

Has anyone tried compared the various WE ga's?

It all appears the same just more strands.

Running the 16ga in two separate systems. (for testing)

It would have been useful if Jeff Day had tried a shielded version of the WE 16 ga.

Maxima9, I agree. I plan on building a shielded version. Currently I am running unshielded. WE16ga is so interesting sounding to me that I want to learn as much as possible before drawing any firm conclusions. Incidentally I don't necessarily agree that Belden sound forgiving at least I don't hear them that way in my system. But the WE16 IC never sounded polite to me and before they were broken in there was times that they sounded aggressive. WE16 IC are so far musical force and very expressive in my system.

I would also add that I don't want my system to sound forgiving. Once again a listener preference.

Jet, look at Jeff Day's blog/thread on the WE IC's as there is a link to "Take Five Audio" for Belden braided tube shielding. They offer various sizes. I used 1/4-1/3 inch as 1/2 inch would be too big. It does expand a little. Hard to work with this stuff. I soldered a 14 gauge solid core copper wire to the tip of the twisted runs and carefully pulled the twisted cable through the braided tubing. Only way to really do it.

I then covered the braid with heat shrink tubing as the braid is conductive as you know. I then covered the braid with cloth.

This was somewhat difficult and time consuming for me.

Yes, the shieded WE version is in between the nude WE cable and Belden in terms of sonic personality. I found it not quite as forgiving as the Belden and not quite as "bright" as the nude. Good middle ground for me anyway.