Dear JOB customers and followers, hereafter more technical specs about the new JOB INTegrated.
POWER SUPPLY
Nominal line voltage: 117 or 234 V (switchable)
Fuse 8A for 110V and 220V
Input voltage range: +/- 10 %
Rated Power Consumption:
IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit)
Max Power Consumption:
IEC 60065 at 8 Ω /1% THD: 700 W
OUTPUT POWER
FPP at 8 Ω: 190 W
IEC 60065 at 8 Ω / 1 % THD+N: 2 x 175 W
INPUTS
USB device:
- Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on
Linux, driver required only for Windows)
- Sample rate up to 384 kHz/Bit depth up to 32
- DSD over PCM capabilities
1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms
1 x Analog RCA (Left & Right): ADC conversion for DSP correction
REAR PANEL CONNECTORS AND CONTROLS
2 x output binding posts Left & Right
Voltage input selector
RS232 Command connector
FREQUENCY RESPONSE
20 Hz - 20 kHz, unloaded: +/- 0.5 dB
DISTORTION
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output
IMD (SMPTE), unloaded: < 0.02 % before clipping
OUTPUT NOISE FLOOR
Inputs terminated with RCA Shorting Caps, unloaded: < 10 µV from 20 Hz to 20 kH
DYNAMIC RANGE
22 kHz measurement bandwidth (flat): > 100 dB
GAIN
35 dB
DAMPING FACTOR
220 at 1 kHz, 8 Ω
In case you have any questions please use our email address service@jobsys.com. No technical questions will be answered from this page. Have a nice evening !!
