DTC:
I think Benchmark only outputs 24/96K via USB. It will output 176 and 192k via the AES/EBU and digital outputs (including optical). Another reason not to go USB (and record to the Tascam), if you want higher than 96K. However, I was told 96K may be the optimum sample rate and higher rates may not sound as good or better.
The other thing I discovered was the Benchmark has much more flexible input gain ranges. You can get up to 29 dB of gain, whereas the Tascam will give you a max of 12 dB. This was an issue due to the low output voltage of the Spectral with a MC cartridge, and the highest signal levels I could get were about -10 dBU at the peaks when recording an LP.
The gain is also set in the Benchmark via analog devices like switches, resistors, and pots. The Tascam uses digital methods as you enter the gain numerically in 0.5 dB steps via the LCD screen.
I think Benchmark only outputs 24/96K via USB. It will output 176 and 192k via the AES/EBU and digital outputs (including optical). Another reason not to go USB (and record to the Tascam), if you want higher than 96K. However, I was told 96K may be the optimum sample rate and higher rates may not sound as good or better.
The other thing I discovered was the Benchmark has much more flexible input gain ranges. You can get up to 29 dB of gain, whereas the Tascam will give you a max of 12 dB. This was an issue due to the low output voltage of the Spectral with a MC cartridge, and the highest signal levels I could get were about -10 dBU at the peaks when recording an LP.
The gain is also set in the Benchmark via analog devices like switches, resistors, and pots. The Tascam uses digital methods as you enter the gain numerically in 0.5 dB steps via the LCD screen.