2. amps-preamps
  3. 1447081586

Suggestions for integrated amps for B&W CM10

I recently bought the Bowers and Wilkins CM10 speakers, currently paired with Peachtree Audio Nova 125. Although, the clarity and details are phenomenal, I can't help but notice two shortcomings:

1. At times, things get a bit too bright for my taste -- also, I would prefer a bit more warmth
2. It doesn't seem that the Nova has enough authority to drive the bass drivers that well. I just feel that I can get more from these speakers on the lower end without adding a separate sub.

Now, I do realize that the speakers are fairly new with less than 30 hours on them, so maybe things will get better after the break in period. And I also realize that the placement and the room characteristics are not ideal.

But having said that, I would be interested in suggestions for what other integrated amps (or even separates if affordable) go well with the CM10s and provide a bit more warmth and better base. Budget is under$2500, new or used.
128x128arafiq
zd542
5,339 posts
 
You have more options going with separates. Assuming the speakers are broken in, the harshness usually involves the preamp. My personal feeling on the matter, is to get an amp with more power and easier on the ears. And since you really can't get a great active preamp with your budget, I would use a passive.
dhl93449
455 posts
 
In my experience B&Ws need decent power to sound good, and more important, lots of current from the power amp.

For a budget, I recommend Parasound power amps, the used discontinued HCA series, model 1500 or higher (200 W/Ch). Assuming of course you integrated amp has a pre-amp output to drive a separate power amp. You can often find these for about $500-600 used.

Regarding brightness, I have found for some B&Ws moving them a little further apart reduces the upper midrange re-inforcement you sometimes get. Clean power amplification is a must as these can be very revealing of HF distortion.
jrinkerptdnet
430 posts
 
you say "at times" it is too bright ... maybe source and/or the media is the issue?? a bright recording SHOULD sound bright on a resolving system
paraneer's avatar
paraneer
818 posts
 
B&W's are known to be a fairly bright speaker to begin with plus your matching it to a Class D amp that usually has the same rap.

I would suggest you give the Parasound Halo Integrated a serious look. Its Class A/AB and at 160 wpc into 8 & 240 wpc into 4, it should deliver all the warmth and power your CM10's need. Right at your budget of $2500 too brand new!
arafiq's avatar
arafiq OP
1,693 posts
 
Thanks for the sound advice everyone. I see that pairing my Class D Peachtree with the CM10s is probably not the ideal setup. I will definitely look for Parasound integrated ... need to find a dealer in the Dallas area.

The sales rep at the Best Buy Magnolia Design Center is pushing the Rotel gear (either integrated or separates), saying that usually the synergy between Rotel and B&W is quite good. Rotel separates are coming out to be around $2700 as well.

What do you guys think of Rotel when compared to Parasound?
More to discover