2. analog
  3. 119329-538

Should I consider a cartridge upgrade?

How "much" cartridge is too much?
Hi All,

I currently am very happy with my VPI Scoutmaster/JMW9/Soundsmith Paua/edensound Terracone footers/Edensound Terrastone platforms for TT and separate for motor/edensound brass damping weights for motor and plinth/Transparent Reference MM2 phono/Herron VTPH-2 analog setup.

I have another year or more before I need my Paua retipped.

I am wondering how much higher I can go with cartridge price/performance with this setup and still reap the benefits of the cartridge? I used a Zephyr Mk II before that, which I love; I did notice a significant improvement going to the Paua.

I know some will suggest just buying a different TT, but this was my late father's table, and I would like to stick with it.

By the way, the current setup sounds awesome, so I will be fine with retipping my Paua and sticking with it if that seems best.

Thanks for your thoughts!
Arsh

Main System:

VPI Scoutmaster, Soundsmith Paua, VPI SDS, Transparent Reference MM2 phono, Herron VTPH-2, Herron IC, Musical Fidelity NuVista CDP, Transparent Ultra MM and Transparent digital cable, Musical Fidelity NuVista 800, Transparent Reference MM2 SC, Wilson Audio Sasha, Transparent Powerbank 8 and Transparent power cords, Terracones and Terrastone platforms, Atacama Equinox rack.

arsh
arsh OP
367 posts
 
Could you tell me more about your experience with the 3D arm please? Thanks!
onhwy61's avatar
onhwy61
5,337 posts
 
A sign of audiophile maturity is knowing when to stop.  It's already awesome!  If you really want to "upgrade", junk everything (including phono state) and budget at least $25k.  It won't be state of the art, but it will be jaw-dropping awesome.
arsh OP
367 posts
 
Thanks onhwy61,

i appreciate your comment. Over the years, I have been conservative as far as changing my system. It was static for 12 years before I started to refresh it about 2 years ago. I do not change or swap gear often. I see no reason to spend 25k. I am simply seeking to improve what I have without changing everything, and the cartridge seemed a logical item to consider.
brf
1,715 posts
 
Your JMW 9 is a 9 inch arm and VPI does not make a direct swap out 9 inch 3D arm, therefore, you can purchase a 10" 3D arm and VPI will provide you with a mounting plate that attached to your SS plinth to make sure that your new longer 3D tonearm is properly aligned with the correct spindle to pivot distance. 
arsh OP
367 posts
 
Thanks brf.
More to discover