Proportion of expenses

This question has been asked many times over the years. You could try searching the archives for other answers.

From my experiences, and listening to others, there seems to be no magic formula for success. No shortcuts for experience. There are dozens, perhaps hundreds of paths to audio nirvana.

Some swear by speakers first, some amps first, some will call the preamp the heart of the system, while others will even call cables the key to success. Some will spend 80% of their budget on speakers, some will spend 80% of their budget on cables.

If you ask 10 different audiophiles the same question you will get 11 different answers.

Nab2 - I agree with the other posters feedback, but would also like to add...
As you move up in the price range the "ratios" can change dramatically.

e.g. - I have a pair of speakers in my AV system that are around 18% of the whole system - but on my 2-channel system they represent around 35% of the total system cost.

Factor in an individuals personal brand preferences and/or their desire to have the latest technological advances and you will get ratios that are all over the map.

It can also change based on how much "hi-fi Knowledge" a person has to begin with or acquired over the years they have been involved in this "obsession".

As an example of this - if you would have told me 30 years ago that I’d be spending as much as I have on cables - I would have said you were insane - but here I am :-)

The variables are many and in many ways the question in your OP is as difficult to answer as that age old question...

How Long Is A Piece Of String?

Regards...

Good thoughts above. The speaker/amp interaction is perhaps the most critical, and since speakers do vary much more in their presentation than amps, I’d suggest starting with speakers and then choosing an amp based on their demands/requirements. There are certain electrical interactions that are very important; read through posts by members almarg and atmasphere to understand some of them. If I were starting from scratch, I would work upstream, then. There are interactions between amp and pre-amp that are also critical to getting a wide, smooth frequency response based on their input and output impedance. With respect to pre-amp, if you will have more than one source, then source switching is of course necessary. If you will have only one source (for example from a digital to analog converter (DAC) or multiple digital sources through a multi-input DAC, then you can use a simple passive volume control or passive pre-amp. An excellent passive is MUCH less expensive than an excellent active pre-amp.  However, with passives, componenet matching is critical, so read up on that, if it’s an option. IMO, if you are going primarily or exclusively digital, you’re in a good position right now to maximize your investment. High quality high resolution DACs right now can be had very inexpensively, and can be driven from digital files ripped to a computer.

If you are going analog, then that is an area that requires, IMO, more direct guidance. Give us some more information in the areas noted by the posters above (room size, musical preferences, approx. budget) and we can start to get more specific.

Finally, a very good way to get started is to go to one of the shows that are out there; Rocky Mtn Audiofest, Capitol, THE, Newport, etc. Take a tour around to get some idea of what impressed you, then go back to those rooms and ask questions.

As a start, I found "The Complete Guide To High End Audio" Fifth Edition by Robert Harley very helpful as an overall guide to your questions. It is available as an iBook on iTunes. I refer to it from time to time.

It has a section devoted to cost allocations which is very useful.

The book has been the best investment I've made in Hi-Fi to date.