High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
bugredmachine, hi. I put one MC-0.5 in the wall outlet where my power distribution box is plugged to (PRO PC to distribution).
I have a second one plugged into open outlet on distribution box.
A great price for moving to a higher level of musical display and musical enjoyment.
Cheers D
Wow!  Something from HFC that won't send me to debtors' prison.  I just ordered one, will be here Friday.  I will report on my findings.  Thanks for the reports.
@ddraudt; thanks for the update, sounds very promising.
Most of my outlets are in use, but I have two openings.
One for my amp (that I have a UR PC on) and the other for my preamp (that I have an U PC on). So if I got my order in soon enough, maybe I'll be lucky and they will still be in stock?
All of my AC comes from my secondary AC panel and it's filtered through my 5 KVA isolation transformer therefor I have not used the MC-6 or any other device.
lak, I have used isolation transformers, I also have a secondary AC panel with hydraulic/magnetic breakers in stead of the standard thermal breakers. I have worked continually on upgrading my power distribution  system and have made great strides. I have run directionalized 10AWG
wire and use Oyaide R-0 outlets with Furutech wall plate and cover on all 5 outlets. Years of testing different wire for distribution box From a friend of mine. As well as testing different boxes, outlets, inlets ect. Too many improvements to mention. I use the same attention to detail on my speakers, components, room treatment ect. The MC-0.5's brought me closer to the music than I have ever been. Much Closer!!
Excuse me if I think that anyone who doesn't get these is nutz.
;-) D

I am new to HFC. I like to try the U or UR Digital cable between the transport and DAC. Are they as good as the HFC interconnect or speaker? Just order MC-0.5....should receive next week.