Taralabs cables

TARA Labs “SP” Speaker Cables: As the loudspeaker cables carry much higher signal voltage and current into a non-linear impedance (the loudspeaker) the reactive load of the loudspeaker can be difficult for some amplifiers to drive... and the all-important damping factor of the amplifier does change from amplifier to amplifier. The phenomenon is readily apparent, heard as bass that is soft and low in amplitude, sometimes together with high frequencies that are too smooth or rolled-off, in addition to a loss of musicality. However, when these amplifiers are connected with TARA Labs ‘SP’ speaker cable models, the output of some high-end loudspeakers instantly becomes audibly improved at variable frequencies. One of the great attributes of the TARA Labs ‘SP’ speaker cable models, are the 'state-of-the-art' technology and design that was created by TARA Labs. Their performance level is absolutely spectacular when matched with the majority of high-end audio components available today.
TARA Labs ‘SP’ cable models are now available in the Evolution series cables; Air Forte, Air Evolution, Omega Evolution and he Grand Master Evolution.

Taralab's  Air Reference AC




The RSC Air Reference AC  uses Air-tube™ technology that reduces dielectric distortion within cable; has an extremely low noise floor with unsurpassed picture clarity.  It is shielded and has 14 gauge conductor runs; SA-OF8N® copper; 24 RSC® Gen 2 conductors separated into live and neutral paths; live and neutral paths are in individual Teflon® air-tubes™ and separately shielded; ground path is provided by exterior shield; Anti-Corrosion coated SA-OF8N® copper braided shield.
Wattgate standard IEC plug, shielded14 gauge conductor runs.SA-OF8N® copper. 24 RSC® Gen 2 conductors separated into live and neutral paths.Live and neutral paths are in individual Teflon® air-tubes and separately shielded.Ground path is provided by exterior shield.Air-tube™ technology reduces dielectric distortion within cable.Extremely low noise floor.

“The game of these TARA Labs power cords is one of contrasts -- dynamic and especially between the signal and the noise below it -- as well as tonal richness"; there's "soundstage integrity, a wholeness of the sound produced" too.” – Marc Mickelson / Home Audio Equipment Review
 

Tara labs Zero Evolution Phono, this is the only zero Evolution cable that has the generation 3 conductors that is only in the Grandmaster Evolution analog interconnect, ,,




The Zero Evolution Phono-Cable is the epitome of high-end reference quality phono cables. The design and technology used in creating this exceptional cable, is a far cry above any other phono cables that are currently available in today’s marketplace. Extremely low Capacitance as well as exceptional high-frequency extension The Zero Evolution Phono-Cable works very well with all cartridges regardless of voltage.
The Zero Evolution also incorporates a “star-ground” system (SGS) with a variety of optional male/female mini-banana connections. This system is unrivalled in that it provides the option of floating or connecting different sections of The Zero GX Phono-Cable shielding system. There are subtle differences to be heard, some of which are caused by slight variations in the shield and grounding arrangements of the cartridge and the tonearm, and the turntable and the phono-preamp. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a hum or buzz problem. Using The Zero Evolution Phono Cables’ superb proprietary shielding system, we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a “hum or buzz” problem. With The Zero Evolution Phono Cables’ proprietary shielding system (SGS), we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface.
“Master” Gen3 Conductor is: 99.999999% Oxygen-free, mono-crystal, rectangular solid core, hand-polished, frequency-tuned copper conductor.Available termination: RCA, XLR, 5 pin DINHandcrafted in USA and lifetime guaranteedExcellent high-frequency extension & exceptional detailTight bass & full midrangeExtremely revealingImpressive holographic soundstageNeutral & naturalUnparalleled musicality.

Making Sense of….Gen 3 Conductors
TARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
TARA Labs claims that the Gen 3 conductor has an increased bandwidth or high-frequency extension, that makes it unrivalled in important test measurements and listening tests.
TARA Labs’ Matthew Bond said that the new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
Matthew Bond explains why this is possible. “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
According to Matthew Bond, the new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. Bond says that the Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. According to Bond, the term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.