2. home-theater
  3. 1426987878

How to get HIGHEST-rez signal into my dac from a BRP

Right now i play Netflix dvd's on my Mac Mini, with the toslink out to my Benchmark DAC,into my Plinius 8200 MkII amp, into Platinum Audio Solo speakers ( 35Hz is 3dB down point) - no subwoofer has qualified via the WAF.

I'm willing to buy a Blu-ray player BUT only for access to the hi-rez audio they carry ( improved video is secondary)

OK...Now I get barely OK sound on some dvds ( Woody Allen films do ok with sound)...and a lotta times CRAPPY sound off 2-tracks on dvds.
HOW can i get access to the excellent quality audio in Blu-Ray discs DTS-HD Master Audio and/or Dolby® TrueHD?

I heard that the Blu-ray analog outputs are dumbed-down and not hi-rez quality- through the BRP's dac ....and that the desired hi-rez HD Master Audio and/or Dolby® TrueHD only go out via HDMI outputs. As a 2-channel audiophile with great equipment that I got to work synergistically after a lot of work - NO WAY am i going to play movie audio through some all-in-one "AV receiver" !

I am sure many of you fellow audiophiles feel the same way - AND some have solved this problem.

PlEASE, let me know possible solutions or work-arounds to achieve as sweet sound while listening to music as when watching a film.
waterzlife
kr4's avatar
kr4
3,720 posts
 
Typical responses about this "common problem" are usually based on using poor source material and/or comparisons of widely disparate quality compoents. I think you fall into the latter category.

Perhaps the OP should try a hi-rez quality DVD with his current setup in order to see if the problems are not inherent in his equipment. If so, swapping the DVD drive for a BD wouldn't be progress.
zd542
5,339 posts
 
You should at least read his posts more carefully.

"I'm willing to buy a Blu-ray player BUT only for access to the hi-rez audio they carry ( improved video is secondary)"

"HOW can i get access to the excellent quality audio in Blu-Ray discs DTS-HD Master Audio and/or Dolby® TrueHD?"

"As a 2-channel audiophile with great equipment that I got to work synergistically after a lot of work - NO WAY am i going to play movie audio through some all-in-one "AV receiver" !"

You then say.

"Perhaps the OP should try a hi-rez quality DVD with his current setup in order to see if the problems are not inherent in his equipment. If so, swapping the DVD drive for a BD wouldn't be progress."

What setup? He doesn't have one. Since he's using his computer as a source, and doesn't have an AV system, I don't see how trying an external Blu Ray drive could not be a good thing. As of right now, he doesn't have a way to play blu ray's at all. If its not the right solution, no big deal. Bring it back. He loses an hour of his life going to Best Buy. There's no substitute for trying something in your own system. Even if it doesn't work out.
kr4's avatar
kr4
3,720 posts
 
If his present equipment is not capable of demonstrating the advantage of higher-than-CD source material than providing even better source material for it would be pointless. Of course, the return privilege for a BDP would reduce the cost to teh OP's time-and-trouble.
waterzlife OP
139 posts
 
???  Have any of you used an HDMI DE-EMBEDDER....to access the hi-rez audio that apparently is only available througfh the HDMI outputs ( and not the dumbed down digital toslink and coax outputs) ???
courant
119 posts
 
NO WAY am i going to play movie audio through some all-in-one "AV receiver" ! ... Have any of you used an HDMI DE-EMBEDDER....

You could consider a high-end pre-pro. A McIntosh MX160 would likely solve your problem, and deliver "the highest rez," but for a price...

I test-drove a Meridian HD621 and it worked great, but it also required a dedicated Meridian prepro in the mix. The HD621 is possibly the best de-embedder/switcher available, but again that high quality comes at a high cost. And, for me at least, Meridian's "customer service" was more than a little alienating (but I can save that for another thread).
More to discover