WHAT'S THE DEAL WITH WATTS?


I'm considering acquiring a new (for me) integrated, under $2k, to drive my KEF full range speakers. They are very efficient (93db) , 4ohm and rated for 50 - 200 watts.  It seems that a good amp with 80 or 100 watts per channel at 8 ohms will take these speakers to any volume I'd want to experience in my medium sized living room.  So what advantage/benefit in sound am I going to get with 150 -200 watts, or more, per channel? Is it worth spending more for extra power that will never really be demanded?  
larstusor
Post removed 
My bad; these speakers are rated for maximum 300w at 4 ohms.

IMO, power handling ratings for speakers are among the most meaningless spec there is.  Impedance and Sensitivity are the specs that matter most.

At 93db sensitivity, a good 100 wpc amp into 4ohms will drive them to ear splitting levels in a medium sized room.  You do not need an amp that will produce 300wpc into 4 with these speakers. 

When you have extra power it fills out the sound with more authority with more powerful bass.Im using Pass 350.8  wonderful powerful sound getting more watts is always better.

When you have extra power it fills out the sound with more authority with more powerful bass.
True, ebm, but you're using a Pass amp with high power (watts), and also high current. An excellent design.
There are many amps which can produce a high amount of wattage and do not have quality power supplies. So, not all watts are created equally.


Larstusor, a 100wpc amp at 8 ohms that doubles into 4 ohms will be all the power you would need to drive your speakers.  In this case I would advise spending your amp budget on quality vs. quanity watts.