2. cables
  3. 124327-158

Has anyone tried these stunning new CPT power cord?

   Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact. 
   My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies. 

Cheers....and let the tapping begin.......



bacardi
knghifi
1,668 posts
 
corepowertech / worldwidesales,

With a CPT 300, do you suggest plugging in the Weizhi PRS-6 or 20 amp line open duplex?    This Weizhi feeds the sources.
worldwidewholesales
137 posts
 
Hi,

I have a passive conditioner that I plug my CPT 300 into and than I have been slowly replacing all other power cables to each piece of equipment with CPT cords. This has resulted in my system playing at a complete new level. I have also tried CPT cords directly to the duplex and it worked exactly the same. I would say if you do not need the conditioner after trying a CPT cord than get the conditioner out of the chain but if you feel the conditioner is a noticeable improvement, than keep it. I will probably be selling my passive conditioner.

The CPT cords do need a couple of hundred hours before critical listening and 50 hours minimum for them to open up but truth be told, the noise floor drops so dramatically that you can hear it right from the first minute you install the cord.

Cheers,
verafiaudio
758 posts
 
Good Morning,

As I'm new to this forum can anyone tell me if there are means to post photos? I have some before and after shots of our CPT EQUI=CORE that illuminate what I am talking about. 

I know a lot of folks use the E=C after their conditioner (or regenerator) and find the results to be superb. That said, I would guess that 60 to 70% of our customer base plugs their E=C units directly into the wall socket. 

Further - I would imagine that roughly 20 to 25% of our user base is using something like a Wire World Matrix in order to send Balanced AC Power to multiple units. I would caution to however to not exceed the maximum power spec for given E=C units. I spoke with a gentleman yesterday that was powering near to 600 watts worth of equipment on ONE E=C 300. It's working, but I cautioned him against it. 

In June the prices will go up slightly as our metal work and powder coating costs are going up. We have made a slight change to the metal work as well (this is about how the panels attached to the extruded corner rails)...

Thank You,

Mark

PS - JM, if you are reading this thread I want to thank YOU for your lovely call yesterday. I can't tell you how happy I was to hear your description of your system with E=C installed. Made my day... thank you. 
knghifi
1,668 posts
 
The problem with plugging into wall outlet is not enough wall outlets.   I have 2 20 amp lines with a Furutech GTX-D R duplex on each.  One line for amp and other for sources.

I'm surprise no complaints of degradation using a Wire World Matrix.


ozzy's avatar
ozzy
7,639 posts
 

So, if you use a CPT 300 Watt with a 4 outlet adapter, why would you also need individual CPT power cords going to each piece of equipment?

Wouldn't it have already done its thing by splitting the power into a balanced output?

Bacardi, Since you won't swap me with me to try the Cerious Graphene cables and the CPT power cords, I'm going to get one of these power cords to try with/against my Cerious Technologies Graphene power cables.

More to discover