2. cables
  3. 124327-158

Has anyone tried these stunning new CPT power cord?

   Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact. 
   My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies. 

Cheers....and let the tapping begin.......



bacardi
verafiaudio
755 posts
 
Good Morning,

As I'm new to this forum can anyone tell me if there are means to post photos? I have some before and after shots of our CPT EQUI=CORE that illuminate what I am talking about. 

I know a lot of folks use the E=C after their conditioner (or regenerator) and find the results to be superb. That said, I would guess that 60 to 70% of our customer base plugs their E=C units directly into the wall socket. 

Further - I would imagine that roughly 20 to 25% of our user base is using something like a Wire World Matrix in order to send Balanced AC Power to multiple units. I would caution to however to not exceed the maximum power spec for given E=C units. I spoke with a gentleman yesterday that was powering near to 600 watts worth of equipment on ONE E=C 300. It's working, but I cautioned him against it. 

In June the prices will go up slightly as our metal work and powder coating costs are going up. We have made a slight change to the metal work as well (this is about how the panels attached to the extruded corner rails)...

Thank You,

Mark

PS - JM, if you are reading this thread I want to thank YOU for your lovely call yesterday. I can't tell you how happy I was to hear your description of your system with E=C installed. Made my day... thank you. 
knghifi
1,668 posts
 
The problem with plugging into wall outlet is not enough wall outlets.   I have 2 20 amp lines with a Furutech GTX-D R duplex on each.  One line for amp and other for sources.

I'm surprise no complaints of degradation using a Wire World Matrix.


ozzy's avatar
ozzy
7,582 posts
 

So, if you use a CPT 300 Watt with a 4 outlet adapter, why would you also need individual CPT power cords going to each piece of equipment?

Wouldn't it have already done its thing by splitting the power into a balanced output?

Bacardi, Since you won't swap me with me to try the Cerious Graphene cables and the CPT power cords, I'm going to get one of these power cords to try with/against my Cerious Technologies Graphene power cables.

bacardi's avatar
bacardi OP
663 posts
 
Thanks for the offer but I really want you to try one because I think you'll keep it.....that's how good they are......

bacardi's avatar
bacardi OP
663 posts
 
@ozzy, I think using a cord on each component instead of splitting the feed will isolate it better. We are all killing to birds with one stone with these cords. It's conditioning and a power cord in the same package. 
More to discover