Would a Technics SL-1200 MK2 be an upgrade from a Denon DP-31L?

I have a 1200 mk2 and like it a lot. It is stock with an AT120 cartridge. I use the Technics overhang gauge and never have an issue with anything, it just plays records, no fiddling. 

Mine me was used but very clean. Personally, I would not buy a unit that had been abused or missing parts.

Well,I have got 2 cents worth. I've used and modded Technics 1200's. It does look like a DJ table, but dead stock, I prefer it over most entry level tables.  The audio Technica mentioned, needs the phono pre removed at a minimum and really could use a ton of damping before it will get in the league of a stock sl1200. However Audio Technica does have an SL1240. As long as you remove the phono preamp, it competes nicely.  Then lastly, in the last month or so, I have purchased 3 vintage fixer uppers, that were all 3 inexpensive and when I'm finished, each will be quite good.... a Technics SL25 with an Audio Technica ATP-12T arm, a Miida turntable that was made by Denon, it is a nice table with fully adjustable arm and a Sony PS-X60 which has a very nice adjustable on the fly tone arm.  I have no doubt that if you are patient, you'll come across a steal out there.  Not a real recommendation on which way to go, but here are some alternatives to think about. I hope this helps, Tim

The Sony psx 60 is the best, imo. 

Comparing the new 1200 to the old is not close. 

It is like comparing an old, watered down 4 cylinder, low horse powered Mustang to a new high horse power muscle car Mustang of today. Well, maybe not that bad.....but I think you get my drift.

I agree that an sp 10 or 15 is a better choice. Yes, you'll need to get an arm for them but the arm on on the 1200 is compromised and for best performance will need to be replaced. Meaning your better off just doing it right in the first place.

I personally wouldn't buy a 1200, however, if I got him down to 150 to 200 I would play with it, mod it and have fun with it.

Hi raymonda, I'm under the impression that hockey4496 is on a budget. What would you buy at $400 that significantly beats it. I agree that the arm in the 1200 is the weak link, but replace the arm cable, heat shrink the tube and add a decent medium compliance cartridge and it's hard to beat on a budget... By the way, the Technics that I snagged was a SP25, not an SL25. Sorry for the confusion.  

Thanks all for the suggestions, very helpful info. Tim is correct though, I am beyond a being on a tight budget, and i likely can only get a turntable if the seller is willing to work out a trade for it, because as far as spending actual cash goes I could probably afford something equivalent to what you might find in a dumpster covered in old food and possibly used band aids (in my 3rd year of medical school living on student loans = almost no free time 24/7 365days, but more importantly no money for things like audio equipment)